{"product_id":"everlast-powercool-w300-240v","title":"Everlast PowerCool W300 (240V)","description":"\u003cp\u003e\u003cstrong\u003eThis 240V PowerCool cooler can be used with any Everlast welder new or old with the triangular shaped power outlet in the rear.  This includes the new generation units from Dec 2020. \u003c\/strong\u003e Note: 2009 and some 2010 model use a different outlet shape, but still provide 240V to the rear of the unit. When using with the new and old generations, the PowerCart 250 should be used with the TIG and cooler package. The cooler is sized to fit on the bottom shelf. (See picture above for combination).  Extended lines are included as well to mount the cooler in alternate locations apart from the welder.  It can be easily picked up and carried.  This is a non stackable design and works well for general pupose cooling tasks. The unit also includes a flow alarm to prevent damage to the torch when a \"Dry Torch\" or \"Pinched Line\" or \"Loss of Coolant\" condition occurs. The unit also includes the ability to arm and disarm the flow alarm for torches that use small diameter tubing that may trigger the flow alarm.\u003c\/p\u003e\n\u003cp\u003eThe Power Cool W300 240V water cooler from Everlast is designed to work with Everlast TIG welders to provide the maximum cooling capacity and includes a special 240V plug for the socket on the Everlast welder rear panel. This plug may be removed or changed for applications with other brands of welders.  The unit features color coded quick connectors for rapid and correct connection of the torch lines.  The radiator is made from copper for maximum cooling capability.  The Italian made pump is made from  stainless steel with a bronze impeller for maximum wearability.   The Italian industrial motor is sealed for best protection from the elements.  The standard unit is 240V.  120V is available for other units with 120V requirements.  A generous reservoir holds just a little over 2 gallons of coolant for maximum circulation capacity. \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNotice:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eEverlast is aware that customers may be using various  types of coolant in their PowerCool Water Coolers and with  our NOVA or other brand TIG torches. These range from distilled water to Isopropyl alcohol to  automotive type anti-freeze to R.V. anti-freeze to “private concoctions.”   Since the PowerCool product line  was released over 12 years ago we’ve gathered valuable data and gained experience concerning the use of coolants and their impact on both the lifespan of the cooler and the TIG torches themselves.  With that said, there are several areas of concern that we look for in a coolant. We have found that most popular alternatives fail to provide satisfactory performance.  We have taken our findings and concerns and listed them below as basic elementary requirements needed for best performance and product life.\u003c\/p\u003e\n\n\u003cp\u003eOur concerns about TIG water cooler coolants are:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eThat the Coolant provide satisfactory Ant-Freeze Characteristics.  While some may provide some sub-freezing  characteristic protection, they do not provide enough or provide inconsistent  sub-freezing protection.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant itself offer additional wetting and heat transfer characteristics, or at least doesn’t interfere with the water base level cooling ability. Not all anti-freezes are designed to improve cooling characteristics.\u003c\/li\u003e\n\u003cli\u003eThat Coolant provides anti-algae conditioners. This helps to prevent torch plugging and blockage of lines, and narrow torch passages and reduces the need for frequent coolant exchanges and cleaning of torches.\u003c\/li\u003e\n\u003cli\u003eThe shelf life of the Coolant is satisfactory.  Coolant should last in a commercial environment without break-down, gassing off etc. for an extended period of time.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant is designed to be flowable for rapid recycle  conditions.  Some times of Coolant are for static  or low flow conditions only.  I.E. certain types of R. V. Coolant.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant not be conductive.  Many automotive type coolants have certain conditioners and additives that make it electrically conductive.  Conductive Coolants can make High Frequency starting more difficult as it tends to rob and dissipate the H.F. energy. Can also contribute to arc instability in general.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant be compatible with the common silicone, rubber, PVC formulations of the components found in our torch cables and most other brand torch cables  on the market without deteriorating them.  This is a large concern.  Certain types of coolant can cause dry rot, premature aging, and leaks. Good coolants also provide conditioners expressly made for protection and conditioning of the components.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant be compatible with the materials found in the torch head such as brass, copper and solder without corroding the components. Good coolants also provide lubricity to the mechanical components without impeding flow or making it overly viscous.\u003c\/li\u003e\n\u003cli\u003eThat the Coolant be compatible with all the materials found in the cooler, including copper, brass, PVC, silicone, rubber, etc., without leading to corrosion, deterioration or component failure.\u003c\/li\u003e\n\u003cli\u003eThat the used Coolant be relatively safe, and not a severe hazard to the environment, or at least has safe disposal guidelines attached to it that can help prevent environmental damage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIt is for these reasons, that Everlast is now recommending that customers ONLY use commercial brand coolants designed for use with TIG welders with a rating for use with High Frequency (H.F.).  \u003cem\u003eThese coolants will usually include statements or information regarding the concerns listed above.  \u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIt is also for this reason, that coolers, torches, cables  and related accessories will only be warrantied if used with commercial branded coolants made specifically for TIG welders.   Some commercial coolants for welder coolers are for use with  MIG or Plasma only. Be aware and read the label because they are not compatible.  TIG coolants work fine with some Plasma and MIG applications  where no aluminum is present (except with push-pull guns)  without crossover issues. Off types, personal blends, and internet popularized alternatives can and  will lead to damage or problems with operation, if not now, it will later down the road.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eYes, \u003c\/strong\u003ewe know that commercial coolants are not inexpensive.  You may pay $80.00 or more for 2 gallons of commercially branded TIG water-cooler coolant (the average required to fill one of our coolers). At this point, after investing anywhere between $1500 to $3000+ dollars in a machine, cooler, and torches, this is a small price to pay and is what we feel to be a reasonable amount to protect a much more expensive investment.  Warranty claims cost everyone money and time lost. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQuestion: \u003c\/strong\u003eWhat about Distilled water? Can I use it?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e  Distilled\/De-ionized water, while non-conductive and fairly inoffensive as a possible coolant solution, does not provide algae protection, requires frequent exchanging, and offers no lubricants or conditioners. Nor does it provide any anti-freeze solution. It is to be used only for testing and temporary, emergency use.  It should not be used for more than a period of three weeks before proper coolant is sourced and should be replaced. In and of itself, it will not damage the cooler, but does not promote maximum life, and does not protect the torch components from dry rot.  Over time, due to contamination, it slowly becomes increasingly conductive.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQuestion: \u003c\/strong\u003eWhat Brand do you recommend?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnswer: \u003c\/strong\u003eWhile we are hesitant to endorse one product like this over the other or demand that any one brand of coolant be used, commercial brands like Prax-Air, Air-Gas, Miller, ITW, and Lincoln all provide satisfactory coolants that address the concerns above. There may be others. But extremely low priced coolants, or off brands may not not provide the level of protection required. Again, read the label before purchasing and using. Use due diligence in selecting your coolant.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e What about automotive coolant? It is the same stuff according to the MSDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnswer: \u003c\/strong\u003eNo. An MSDS only gives certain information about type, hazards etc.  It is not an exhaustive list of everything that is in it.  Automotive Antifreeze should NEVER be used of any type. Yes, some welder manufacturers have recommended it in the past, but times have changed and so have their recommendations and materials used.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e RV coolant\/Automotive Coolant  is the same color.  Why can’t I use it just because it is cheaper?  Isn’t it the same?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnswer: \u003c\/strong\u003eDo not rely upon color or price  to dictate your buying choice.  This does not mean they are the same exact product.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e  Can I use a 50\/50 mix of TIG Coolant and Distilled water? Or can I mix brands?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e  Typically, no.  Most are premixed and should be used without mixing any additional or combining with other types.  However, read the directions of the manufacturer and follow them.\u003c\/p\u003e\n\n\u003cp\u003eNOTICE: THIS SUPERCEDES ALL PREVIOUS STATEMENTS AND ENDORSEMENTS MADE BY EVERLAST. IF AN EXISTING PRODUCT IS BEING USED WITH ANY COOLANT DIFFERENT FROM WHAT IS STATED ABOVE BASED OFF A  PREVIOUS  STATEMENT(S) MADE OR ENDORSED BY EVERLAST, THE WARRANTY WILL REMAIN IN EFFECT. HOWEVER, THE COOLANT SHOULD BE COMPLETELY  REMOVED, PROPERLY DISPOSED OF AND UPDATED AS SOON AS REASONABLY POSSIBLE.\u003c\/p\u003e\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Amps: 1.1\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 240V\u003c\/li\u003e\n\u003cli\u003eInput Frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eCapacity: 2 gallons\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 57 lbs\u003c\/li\u003e\n\u003cli\u003eRated Amperage: 350A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient cooling of water cooled TIG torch\u003c\/li\u003e\n\u003cli\u003eCompact design\u003c\/li\u003e\n\u003cli\u003eLarge fan\u003c\/li\u003e\n\u003cli\u003eStainless Steel pump\u003c\/li\u003e\n\u003cli\u003eCopper radiator\u003c\/li\u003e\n\u003cli\u003eAdaptable to other brands\u003c\/li\u003e\n\u003cli\u003eQuick couplers for rapid, leak resistant connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNow with Flow Alarm warning with the ability to turn the alarm on or off.\u003c\/p\u003e\u003ch3\u003eOptional Equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower Cart 250\u003c\/li\u003e\n\u003cli\u003eWater Cooler Parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Areas of Use\u003c\/h3\u003e\u003cp\u003eFor use with water-cooled TIG torches\u003c\/p\u003e\n\u003cp\u003eFor use with water-cooled MIG guns\u003c\/p\u003e\n\u003cp\u003eRecommended for the Following Everlast Models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerArc 280STH\u003c\/li\u003e\n\u003cli\u003ePowerTIG 200DV\u003c\/li\u003e\n\u003cli\u003ePowerTIG 210EXT\u003c\/li\u003e\n\u003cli\u003ePowerTIG 225LX\u003c\/li\u003e\n\u003cli\u003ePowerTIG 250EX\u003c\/li\u003e\n\u003cli\u003ePowerTIG 255EXT\u003c\/li\u003e\n\u003cli\u003ePowerTIG 325EXT (~1 Phase 220V)\u003c\/li\u003e\n\u003cli\u003ePowerTIG 325EXT (~3 Phase 480V)\u003c\/li\u003e\n\u003cli\u003ePowerMTS 221STi\u003c\/li\u003e\n\u003cli\u003eLightningMTS 225\u003c\/li\u003e\n\u003cli\u003ePowerPro 205Si\u003c\/li\u003e\n\u003cli\u003ePowerPro 256Si\u003c\/li\u003e\n\u003cli\u003ePowerPro 256D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct PDF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowerCool 300 Manual\u003cbr\u003ePowerCool Series Brochure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCW300-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":50925447348386,"sku":"PCW300-240","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/9985\/0402\/files\/9d1efeb13eee49af1995499582c04d2e.png?v=1795135356","url":"https:\/\/www.weldshopsupply.com\/products\/everlast-powercool-w300-240v","provider":"Weld Shop Supply","version":"1.0","type":"link"}