{"product_id":"everlast-powerplasma-62i-with-cnc-package","title":"Everlast PowerPlasma 62i with CNC Package","description":"\u003cp\u003eFinally, it is here.  The proven PowerPlasma 62i is now available in a CNC only package.  This unit comes with all the basics to get started with your Plasma table, including CNC port, and CNC torch.  It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table.  The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3\/8\" regular cuts, maximum clean cut capability is up to 3\/4\" (at reduced speeds).  Pierce up to 5\/16\" for production cutting. The new PTM-60 CNC torch is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices.  The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.\u003c\/p\u003e\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComes with CNC torch (Hand torch not included)\u003c\/li\u003e\n\u003cli\u003eEasy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals\u003c\/li\u003e\n\u003cli\u003eCuts virtually any type of metal with ease\u003c\/li\u003e\n\u003cli\u003eSimple to use torches with inexpensive service parts and consumables\u003c\/li\u003e\n\u003cli\u003eCommercial class, 60% Duty cycle at 60 amps for CNC use\u003c\/li\u003e\n\u003cli\u003eClean, smooth cuts with the genuine iPTM 60 CNC torch\u003c\/li\u003e\n\u003cli\u003eBlowback start starts arc without the need of High Frequency which can interfere with surrounding electronics\u003c\/li\u003e\n\u003cli\u003ePilot arc improves performance and cutting on dirty, painted, or rusted metals \u003c\/li\u003e\n\u003cli\u003e3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear\u003c\/li\u003e\n\u003cli\u003eFront air pressure gauge allows quick verification of air pressure\u003c\/li\u003e\n\u003cli\u003eOver Current and Duty Cycle protection indicates fault with a dedicated warning\/diagnostic light, and shuts down output until condition is resolved\u003c\/li\u003e\n\u003cli\u003eAdjustable postflow timer for maximum consumable life\u003c\/li\u003e\n\u003cli\u003eIGBT components improve reliability and performance while reducing overall weight\u003c\/li\u003e\n\u003cli\u003eCNC socket for CNC use on plasma tables with included machine torch\u003c\/li\u003e\n\u003cli\u003eSuitable for use with 11,000 W \"clean power\" generators.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStandard Equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePTM-60 CNC\/Machine Torch with 24 ft. cable and Euro quick-connect central connector\u003c\/li\u003e\n\u003cli\u003eGround Clamp with 10 ft. cable and 25 Dinse connector\u003c\/li\u003e\n\u003cli\u003eAW2000-02 Air Pressure Regulator\/Water Trap (separate air dryer is required to reduce consumable wear and prevent torch damage)\u003c\/li\u003e\n\u003cli\u003eStarter Consumable Kit: 5x IPT-60 Electrodes and 5x IPT-60 1.1mm Nozzles\/Tips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional Equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProtective Cover\u003c\/li\u003e\n\u003cli\u003eIPT-60 Hand Held Plasma Torch 14 ft\u003c\/li\u003e\n\u003cli\u003eIPT-60 Hand Held Plasma Torch 24 ft\u003c\/li\u003e\n\u003cli\u003eIPT-60 Plasma Consumables Kits\u003c\/li\u003e\n\u003cli\u003eNOVA Welding and Fabrication Table\u003c\/li\u003e\n\u003cli\u003eNOVA Clamp and Tool Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Areas of Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHome shop\u003c\/li\u003e\n\u003cli\u003eAutomotive\/muffler shops\u003c\/li\u003e\n\u003cli\u003eMotosports\u003c\/li\u003e\n\u003cli\u003eCommercial fabrication\u003c\/li\u003e\n\u003cli\u003eFactory maintenance\u003c\/li\u003e\n\u003cli\u003eShipyards\u003c\/li\u003e\n\u003cli\u003ePipelines\u003c\/li\u003e\n\u003cli\u003eHVAC\u003c\/li\u003e\n\u003cli\u003eCNC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Metals\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003cli\u003eStainless\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eCopper\u003c\/li\u003e\n\u003cli\u003eTitanium\u003c\/li\u003e\n\u003cli\u003eNickel\/Nickel alloys\u003c\/li\u003e\n\u003cli\u003eVirtually any metal including cast iron\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIGBT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\/phase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220\/240 V 1 Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Amp\/Volt Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20-60A; 88-104V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOCV\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Inrush ( I1MAX ) Amps\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e41A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Rated (I1EFF ) Input Amps\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32.4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDuty Cycle At Rated Amps\/Volts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60% @ 60A\/104V\u003cbr\u003e100% @ 50A\/100V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArc Start Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlow Back (Piston type)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePilotArc\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTorch Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eItalian designed iPT 60 CNC machine torch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCNC Interface Port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustable Post Flow Timer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGouging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLight to Medium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Cutting Air Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Compressor Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6CFM @ 90 psi\/ 30 gallon tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOK-to-Cut Indicator\/Low Air pressure safety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e74 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePP-62I-CNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Everlast","offers":[{"title":"Default Title","offer_id":50925442498722,"sku":"PP-62I-CNC","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/9985\/0402\/files\/64fb13060a08a89bdb53373c59c811f9.png?v=1795135307","url":"https:\/\/www.weldshopsupply.com\/products\/everlast-powerplasma-62i-with-cnc-package","provider":"Weld Shop Supply","version":"1.0","type":"link"}