□
Esab Dual Shield 7100 Ultra .045" x 33 LB Spool — Weld Shop Supply Skip to content
Current Lead time on Bad Ass Reels is 21 Days.
Current Lead time on Bad Ass Reels is 21 Days.
    Esab Dual Shield 7100 Ultra .045" x 33 LB Spool

    Esab Dual Shield 7100 Ultra .045" x 33 LB Spool

    by Esab
    $216.51 - $216.51
    $216.51
    $216.51 - $216.51
    $216.51
    Availability:
    8 in stock, ready to be shipped
    SKU ESB248000044

    Flux Core - DS 7100 ULT Welding Wires, .045 in Dia., 33 lb Spool

    Like many other Dual Shield products, Dual Shield 7100 Ultra operates in a wider parameter range and generates less welding fumes than many similar welding wires. The low spatter levels and easy slag removal minimizes post weld cleanup. Dual Shield 7100 Ultra can be used with either 100% CO2 or 75% Ar/25% CO2. This versatility in gas selection provides the fabricator greater flexibility in choosing both wire and gas.

    Typical Weld Metal Analysis %

    Typical Weld Metal Analysis %
    C Mn P S Si
    100% CO2
    0.02 % 1.3 % 0.010 % 0.013 % 0.5 %
    75% Ar - 25% CO2
    0.03 % 1.6 % 0.010 % 0.012 % 0.6 %

    Approvals

    Approvals ABS
    BV
    CWB CSA W48; E491T-9-H8, E491T-9M-H8
    DNV-GL
    LR
    Approvals are based on factory location. Please contact ESAB for more information.

    Typical Charpy V-Notch Properties

    Impact Value Testing Temperature
    34 J(25 ft-lb) -29 degC(-20 degF)
    58 J(43 ft-lb) -18 degC(0 degF)
    57 J(42 ft-lb) -18 degC(0 degF)
    47 J(35 ft-lb) -29 degC(-20 degF)

    Classifications

    AWS A5.36 : E71T1-C1A2-CS1-DH8
    AWS A5.20 : E71T-9C-DH8
    AWS A5.36 : E71T1-M21-CS1-DH8
    AWS A5.20 : E71T-1C-DH8
    ASME SFA 5.36 :
    ASME SFA 5.20 :
    AWS A5.20 : E71T-1M-DH8
    AWS A5.20 : E71T-9M-DH8

    Consumable Characteristics

    Welding Current DC+
    Alloy Type C Mn

    Typical Tensile Properties

    Condition As Welded As Welded
    Shielding Gas 100% CO2 75% Ar - 25% CO2
    Tensile Strength 585 MPa(85 ksi) 605 MPa(88 ksi)
    Yield Strength 515 MPa(75 ksi) 540 MPa(78 ksi)
    Elongation 26 % 26 %

    Recommended Welding Parameters

    Current TTW Dist. Voltage Wire Diameter Wire Feed Speed
    100% CO2
    135-205 A 9.5-12.7 mm(3/8-1/2 in.) 23-26 V 1.2 mm(.045 in.) 381-660 cm/min(150-260 in./min)
    205-230 A 12.7-19 mm(1/2-3/4 in.) 25-27 V 1.2 mm(.045 in.) 660-965 cm/min(260-380 in./min)
    230-265 A 19-25.4 mm(3/4-1 in.) 26-30 V 1.2 mm(.045 in.) 965-1321 cm/min(380-520 in./min)
    125-235 A 12.7-16 mm(1/2-5/8 in.) 23-26 V 1.4 mm(.052 in.) 279-584 cm/min(110-230 in./min)
    235-290 A 16-19 mm(5/8-3/4 in.) 25-29 V 1.4 mm(.052 in.) 584-864 cm/min(230-340 in./min)
    290-350 A 19-25.4 mm(3/4-1 in.) 29-31 V 1.4 mm(.052 in.) 864-1194 cm/min(340-470 in./min)
    165-270 A 16-19 mm(5/8-3/4 in.) 25-28 V 1.6 mm(1/16 in.) 279-508 cm/min(110-200 in./min)
    270-345 A 19-25.4 mm(3/4-1 in.) 27-30 V 1.6 mm(1/16 in.) 508-762 cm/min(200-300 in./min)
    345-415 A 25.4-31.75 mm(1-1.25 in.) 28-32 V 1.6 mm(1/16 in.) 762-1067 cm/min(300-420 in./min)
    110-135 A 9.5-12.7 mm(3/8-1/2 in.) 23-25 V 0.9 mm(.035 in.) 559-838 cm/min(220-330 in./min)
    135-160 A 12.7-16 mm(1/2-5/8 in.) 24-28 V 0.9 mm(.035 in.) 838-1118 cm/min(330-440 in./min)
    160-185 A 16-19 mm(5/8-3/4 in.) 26-30 V 0.9 mm(.035 in.) 1118-1397 cm/min(440-550 in./min)
    75% Ar - 25% CO2
    115-145 A 9.5-12.7 mm(3/8-1/2 in.) 23-25 V 0.9 mm(.035 in.) 1118-1397 cm/min(440-550 in./min)
    145-165 A 12.7-16 mm(1/2-5/8 in.) 24-27 V 0.9 mm(.035 in.) 1118-1397 cm/min(440-550 in./min)
    165-190 A 16-19 mm(5/8-3/4 in.) 25-30 V 0.9 mm(.035 in.) 1118-1397 cm/min(440-550 in./min)
    130-200 A 9.5-12.7 mm(3/8-1/2 in.) 22-26 V 1.2 mm(.045 in.) 381-660 cm/min(150-260 in./min)
    200-225 A 12.7-19 mm(1/2-3/4 in.) 24-27 V 1.2 mm(.045 in.) 660-965 cm/min(260-380 in./min)
    225-265 A 19-25.4 mm(3/4-1 in.) 27-29 V 1.2 mm(.045 in.) 965-1321 cm/min(380-520 in./min)
    135-250 A 12.7-16 mm(1/2-5/8 in.) 22-26 V 1.4 mm(.052 in.) 279-584 cm/min(110-230 in./min)
    250-295 A 16-19 mm(5/8-3/4 in.) 25-29 V 1.4 mm(.052 in.) 584-864 cm/min(230-340 in./min)
    295-355 A 19-25.4 mm(3/4-1 in.) 27-31 V 1.4 mm(.052 in.) 864-1194 cm/min(340-470 in./min)
    185-285 A 16-19 mm(5/8-3/4 in.) 24-28 V 1.6 mm(1/16 in.) 279-508 cm/min(110-200 in./min)
    285-340 A 19-25.4 mm(3/4-1 in.) 27-30 V 1.6 mm(1/16 in.) 508-762 cm/min(200-300 in./min)
    340-400 A 25.4-31.75 mm(1-1.25 in.) 28-32 V 1.6 mm(1/16 in.) 762-1067 cm/min(300-420 in./min)

    Deposition Data

    Current Deposition Rate Diameter Efficiency (%) Voltage Wire Feed Speed
    100% CO2
    192 A 2.5 kg/h(5.5 lb/h) 1.2 mm(.045 in.) 79 % 25.5 V 762 cm/min(300 in./min)
    230 A 3.3 kg/h(7.4 lb/h) 1.2 mm(.045 in.) 82 % 27 V 1016 cm/min(400 in./min)
    275 A 4.4 kg/h(9.6 lb/h) 1.2 mm(.045 in.) 83 % 28.5 V 1270 cm/min(500 in./min)
    150 A 1.6 kg/h(3.6 lb/h) 1.4 mm(.052 in.) 76 % 23.5 V 381 cm/min(150 in./min)
    190 A 2.2 kg/h(4.9 lb/h) 1.4 mm(.052 in.) 78 % 24 V 508 cm/min(200 in./min)
    250 A 3.5 kg/h(7.7 lb/h) 1.4 mm(.052 in.) 82 % 25.5 V 762 cm/min(300 in./min)
    300 A 4.7 kg/h(10.3 lb/h) 1.4 mm(.052 in.) 83 % 27 V 1016 cm/min(400 in./min)
    105 A 1.3 kg/h(2.8 lb/h) 0.9 mm(.035 in.) 86 % 24 V 635 cm/min(250 in./min)
    140 A 2.1 kg/h(4.6 lb/h) 0.9 mm(.035 in.)