3 Series Victor Style Acetylene Cutting Torch Tips 

• Use with 3 series Victor Style Cutting Torches
• Acetylene Gas

Use 3 Series Victor style cutting torch tip #000 to cut up to 1/8" Steel with oxygen pressure of 25 pounds and acetylene pressure of 4 pounds with a speed of 25 inches per minute producing a .04" thick kerf width.

Use 3 Series Victor Style cutting torch tip #00 to cut up to 1/4" Steel with oxygen pressure of 25 pounds and acetylene pressure of 4 pounds with a speed of 28 inches per minute producing a .05" thick kerf width.

Use 3 Series Victor Style cutting torch tip #0 to cut up to 1/2" Steel with oxygen pressure of 30 pounds and acetylene pressure of 4 pounds with a speed of 22 inches per minute producing a .06" thick kerf width.

 Use 3 Series Victor Style cutting torch tip #1 to cut up to 3/4" Steel with oxygen pressure of 38 pounds and acetylene pressure of 5 pounds with a speed of 20 inches per minute producing a .07" thick kerf width.

 Use 3 Series Victor Style cutting torch tip #2 to cut up to 1" Steel with oxygen pressure of 37 pounds and acetylene pressure of 6 pounds with a speed of 17 inches per minute producing a .09" thick kerf width.

Use 3 Series Victor Style cutting torch tip #3 to cut up to 2" Steel with oxygen pressure of 42 pounds and acetylene pressure of 8 pounds with a speed of 13 inches per minute producing a .11" thick kerf width.

Use 3 Series Victor Style cutting torch tip #4 to cut up to 3" Steel with oxygen pressure of 45 pounds and acetylene pressure of 8 pounds with a speed of 10 inches per minute producing a .12" thick kerf width.

Follow manufacturers recommended safety specifications whenever using cutting torches and flammable gases. 

At no time should the withdrawal rate of an individual cylinder of acetylene exceed 1/7th of the contents per hour. If additional flow is required use and acetylene manifold system of sufficient size to supply the necessary volume. 

Choose appropriate torch hoses and flow rates when using cutting torch tips.