Everlast PowerPlasma 82i
Everlast PowerPlasma 82i
In stock
The PowerPlasma 82i is really a plasma cutter in a class by itself. When you consider the performance capability of the machine, design features and the price of the unit together, there really is nothing to compare it to. Sure there are a couple of 80-90 Amp plasma cutters on the market, but hey, if you are on a budget, they aren't even close to what we offer in a machine this size when all things are considered overall. Here's a few features that the PowerPlasma 82i has that that should get your attention:
- Digital Controlled Circuitry. This means reduced components and increased reliability
- A Digital Air Pressure Gauge. You can precisely monitor air pressure fluctuations.
- Digital Air Pressure Setting Guide. Color Coded LED's eliminate guess work for best air pressure setting.
- Super Bright LED display. Read your settings a greater distance and in brighter lighting than any other brand.
- Adjustable Post-Flow Control. This allows you to be in charge of how long the air flows, reducing annoyingly and unecessarily long post flow time, reducing air consumption and noise levels from contantly running compressors.
- Built in CNC capability. (See our CNC package for the machine torch option)
- Gouge mode for moderate gouging needs.
- A Pilot Arc Tip saver function and a Auto-relight function allows you to choose the best mode of operation for to choose whether to maximize consumable life, or maximize cutting capability and speed on rusty/painted or expanded metal.
- 60% Duty Cycle takes the unit into a very exclusive club. This is the highest rated duty cycle of any plasma cutter on the market on 1 phase 240V input. The competitors offer only 50% and 40% duty cycles on 1 phase 240V.
- 5 Year Warranty parts and labor warranty on the machine. The best the competitors can do is 3 years.
- A Price that beats anyone. You'll be hard pressed to find a 40 amp plasma cutter at this price from the other guys.
Features & Benefits
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial/Industrial class, 60% Duty cycle at 80 amps
- Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Adjustable post flow control up to 50 seconds to improve consumable and torch life
- Digital air pressure gauge air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- Digital Air Pressure guide makes air pressure adjustment a no-brainer.
- CNC socket for CNC use on plasma tables (machine torch optional)
Standard Equipment
- IPT-80 Hand Held Torch with 14 ft. cable and Euro quick-connect central connector
- Ground Clamp with 25 Dinse connector
- Air Pressure Regulator/Water Trap (separate air dryer is required to reduce consumable wear and prevent torch damage)
- Consumable starter kit: 5x IPT-80 Electrodes and 5x IPT-80 1.2mm Nozzles/Tips\
- WEiPU SP21 CNC Connector 12 Pin
Optional Equipment
- Protective Cover
- IPT-80 Hand Held Torch 24 ft.
- IPT-80 Plasma Consumables Kits
- IPT-80M Plasma Machine Torch (CNC)
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home shop
- Automotive/muffler shops
- Motosports
- Farm/Ranch
- Commercial fabrication
- Factory maintenance
- Shipyards
- Pipelines
- HVAC
- CNC
Recommended Metals
- Steel
- Stainless
- Aluminum
- Copper
- Titanium
- Nickel/Nickel alloys
- Virtually any metal including cast iron
Specifications
| Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| Output Amp/Volt Range | 20-80A/88V-112V |
| OCV | 240 |
| Max Inrush ( I1MAX ) Amps | @ 240V: 58A |
| Maximum Rated (I1EFF ) Input Amps | @240V: 45.2A |
| Duty Cycle At Rated Amps/Volts | 60% @ 80A/112V 100% @ 63A/105V |
| Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | Italian designed iPT 80 torch |
| CNC Interface Port | Yes |
| Adjustable Post Flow Timer | Yes |
| Gouging | Light to Medium |
| Recommended Cutting Air Pressure | 70-75psi |
| Recommended Compressor Capacity | 7CFM @ 90 psi/60 gallon tank |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Amps/Volts @ 60% Duty Cycle | 80A/ 112V |
| Warranty | 5 year |
| Shipping Weight | 77 lbs |
| Part Number | PP-82I |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

