Everlast Cyclone 263Pi
Everlast Cyclone 263Pi
In stock
Pulse MIG technology has come a long way since it's introduction decades ago. Today, the Cyclone 263Pi continues the evolution of Pulse MIG technology with new digitally controlled synergic technology and refined programming engineered for peak performance over a wide variety of applications. Combining speed, flexibility, and control, the resulting high quality weld is a perfect alternative for structural welding applications. With a true commercial/industrial design the Cyclone 263Pi delivers a duty cycle of 60% @ 275A of MIG welding output, with special settings for Steel, Stainless, Aluminum, Flux-Cored and Gasless Flux-Cored welding. The fully synergic pulse gives maximum control over welding while reducing spatter to almost nothing. For distance applications in aluminum, the unit is ready to accept both optional spool guns and push pull guns.
Not only is the unit the perfect Pulse MIG welder, the unit is perfect for standard short circuit and spray arc welding applications, with a heavy duty MIG welding gun designed to withstand the heat and duty cycle that this unit is capable of producing. The Cyclone 263Pi also features advanced stick welding capability with the ability to weld E6010 and most any other welding rod up to 5/32" and 3/16" (depending upon the type) and also also features lift start DC TIG for applications like pipe, construction and commercial steel fabrication.
Features & Benefits
- All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
- 4.3 HD Color LCD screen
- Intuitive setup
- Short Circuit, Spray Arc operation
- Synergic Single Pulse MIG operation
- Flux-Cored (Gasless or Gas-Shielded) operation
- DC Live lift TIG operation
- E6010 Operation for root pass welding
- PowerSet mode for easy setup and use even with Pulse MIG function
- Full manual mode with complete control of settings
- Commercial design makes it perfect for production shops and general fabrication
- 8" and 12" Diameter wire spool capacity provides a good compromise for long duration welding and portability.
- Synergic MIG operation or Standard MIG operation.
- Easy to use, operator friendly panel to select features.
- Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable Arc Force Control allows the user to dial in desired Stick welding performance..
- Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.
- Spool gun and Push Pull Capable for MIG
- Exclusive 30 channel memory function allows favorite settings to be stored for quick setup.
- Lift Start TIG without remote
- 2T/4T torch trigger/latch function offers stepped control welding with MIG.
- Adjustable Pre and Post flow for d MIG operation improves over all weld quality by reducing porosity during start/stops.
Standard Equipment
- 36 series MIG Gun with 10 ft. cable and Euro style quick connector
- Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- Argon Regulator with Hose
- Spare M8 Contact Tip
- Drive Roll V Groove .035"-.045" (Double) installed
- Spare Drive Roll V Groove .023"-.030" (Double)
- Spare Drive Roll V Groove .045"-.062" (Double)
- Spare Drive Roll Flux Core .045"-.062" (Double)
Optional Equipment
- Parker DSP 360 Spool Gun
- V Groove Drive Rolls (Hard Wire)
- Flux Core Drive Rolls
- U Groove Drive Rolls (Aluminum Wire)
- Protective Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- MIG Liners
- MIG Guns
- MIG Consumables Kit
- PowerCart 375LF
Recommended Areas of Use
- Portable Repair
- Automotive Garages/Muffler Shops
- Motor Sports
- Construction/ Pipe/Structural Steel
- HVAC
- Factory Maintenance
- Farm
- Industrial Production
- Fabrication
- Research/Education
- Pipe
Recommended Metals
Steel
Stainless
Titanium
Aluminum ( MIG processes only)
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, DC TIG, DC Stick |
| Voltage/phase | 220/240 V 1 PHASE |
| Max Rated MIG Amps | 275A |
| Max Rated TIG Amps | 250A |
| Max Rated Stick Amps | 220A |
| MIG Amps/Volts @ Rated Duty Cycle | 275A/27.8V @ 60% Duty Cycle (40°C/104°F) |
| TIG Output Amps/Volts @ Rated Duty Cycle | 250A/20V @ 60% Duty Cycle (40°C/104°F) |
| Stick Amps/Volts @ Rated Duty Cycle | 220A/28V @ 60% Duty Cycle (40°C/104°F) |
| Max Inrush ( I1MAX ) Amps | 48A |
| Maximum Rated (I1EFF ) Input Amps | 38A |
| OCV | 80V |
| MIG Output Range | 30-275A/15.5-27.8V |
| TIG Output Range | 10A-250A/ 10.4V-20V |
| Stick Output Range | 10-220A/20.4-28V |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse | Single |
| Pulse Frequency | MIG: Synergically Controlled |
| Pulse Time On | MIG: Synergically Controlled |
| Pulse Volts | MIG: Synergically Controlled Pulse Voltage |
| Standard Drive Roll wire size | .035”-.045” |
| Separate wire feeder | No, self contained |
| Number of Drive rollers | 4 |
| Max Wire Feed Speed | 600IPM |
| Max Wire Roll Diameter | 12” (full size up to 44lb) |
| Memory | Yes |
| Foot Pedal | None/Not Applicable |
| Air Carbon Arc | No |
| 2T/4T /Torch latch/Trigger | Yes |
| Torch Type | MIG: North 36 series with yellow (.062") and red steel liner (.045") (Other liners available) TIG: 26 series TIG torch |
| Other Features | DC Lift Start TIG Run-in Wire Jog Gas Purge PowerSet Mode Push-Pull Capability |
| Warranty | 5 year |
| Shipping Weight | 99 lbs |
| Part Number | CLN-263PI-240 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


