Everlast Cyclone 313Pi
Everlast Cyclone 313Pi
In stock
The Cyclone 313Pi is designed to handle a wide variety of welding chores in most any fabrication or production facility. The Synergic Single Pulse MIG design delivers, exceptionally smooth spatter free welds while helping to control distortion. The Pulse MIG function allows the user to travel faster than standard short circuit MIG and to go out of position while welding and maintain maximum control of the puddle. The unit also excels at regular short circuit and spray arc MIG, delivering reliable performance up to the maximum output of 315A.
The unit also features both DC Stick operation for added versatility The unit delivers up to 250A Stick Output. This is more than enough to tackle most any heavy shop welding. For those customers that need real stick performance in a MIG, don't worry. This unit delivers smooth stable welds, even with E6010 that are comparable with most any dedicated stick welder out there. This allows the Cyclone 313Pi to be a versatile player in any shop and helps keep the work flow going, regardless of the process requirements. The heavy duty undercarriage allows the unit to be easily transported anywhere it is needed. The integrated "Roll Cage" keeps the machine protected while getting knocked around in the shop. The unit will hold up to a 9" cylinder (diameter), which will allow the use most full size gas cylinders. The full size 12" capacity and 4 roller drive system can easily feed wire spools up to 44 lbs.
The large 5.1" HD TFT LCD screen is intuitive and simple to use. All settings for each process are on a single page. There are no popups or hidden menus to access to make all the major adjustments required. The operator can view all settings at a glance and easily make changes without pulling up additional menus or wading through bottlenecks in programming. Simple navigation keys carry where you want, and the knobs rotate to increase or decrease the setting's value.
Features & Benefits
- All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
- 5.1 TFT HD Color LCD screen
- Intuitive setup
- Short Circuit, Spray Arc operation
- Synergic Single Pulse MIG operation
- Flux-Cored (Gasless or Gas-Shielded) operation
- E6010 Operation for root pass welding
- PowerSet mode for easy setup and use even with Pulse MIG function
- Full manual mode with complete control of settings
- Commercial design makes it perfect for production shops and general fabrication
- 8" and 12" Diameter wire spool capacity provides a good compromise for long duration welding and portability.
- Synergic MIG operation or Standard MIG operation.
- Easy to use, operator friendly panel to select features.
- Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable Arc Force Control allows the user to dial in desired Stick welding performance..
- Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.
- Spool gun and Push Pull Capable for MIG
- Exclusive 30 channel memory function allows favorite settings to be stored for quick setup.
- 2T/4T torch trigger/latch function offers stepped control welding with MIG.
- Adjustable Pre and Post flow for d MIG operation improves over all weld quality by reducing porosity during start/stops.
Standard Equipment
- 36 series MIG Gun with 10 ft. cable and Euro style quick connector
- Stick Electrode Holder with 10 ft. cable and 35 Dinse connector
- Ground Clamp with 10 ft. cable and 35 Dinse connector
- Argon Regulator with Hose
- Spare M8 Contact Tip
- Yellow Steel Liner .045"-.062" 10ft. installed
- Red Steel Liner .035"-.045" 10 ft. (extra)
- Drive Roll V Groove .035"-.045" (Double) installed
- Spare Drive Roll V Groove .045"-.062" (Double)
- Spare Drive Roll Flux Core .045"-.062" (Double)
Optional Equipment
- Parker DSP 360 Spool Gun
- V Groove Drive Rolls (Hard Wire)
- Flux Core Drive Rolls
- U Groove Drive Rolls (Aluminum Wire)
- Protective Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- MIG Liners
- MIG Guns
- MIG Consumables Kit
Recommended Areas of Use
- Portable Repair
- Automotive Garages/Muffler Shops
- Motor Sports
- Construction/ Pipe/Structural Steel
- HVAC
- Factory Maintenance
- Farm
- Industrial Production
- Fabrication
- Research/Education
- Pipe
Recommended Metals
Steel
Stainless
Aluminum ( MIG processes only)
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, Stick |
| Voltage/phase | 220/240 V 1 PHASE |
| Max Rated MIG Amps | 315A |
| Max Rated Stick Amps | 220A |
| MIG Amps/Volts @ Rated Duty Cycle | 315A/29.8V @ 35% Duty Cycle (40°C/104°F) |
| Stick Amps/Volts @ Rated Duty Cycle | 250A/30V @ 35% Duty Cycle (40°C/104°F) |
| Max Inrush ( I1MAX ) Amps | 64A |
| Maximum Rated (I1EFF ) Input Amps | 38A |
| OCV | 84V |
| MIG Output Range | 30-315A/15.5-29.8V |
| Stick Output Range | 10-250A/20.4-30V |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse | Single |
| Pulse Frequency | MIG: Synergically Controlled |
| Pulse Time On | MIG: Synergically Controlled |
| Pulse Volts | MIG: Synergically Controlled Pulse Voltage |
| Standard Drive Roll wire size | .035”-.045” |
| Separate wire feeder | No, self contained |
| Number of Drive rollers | 4 |
| Max Wire Feed Speed | 600IPM |
| Max Wire Roll Diameter | 12” (full size up to 44lb) |
| Memory | Yes |
| Foot Pedal | None/Not Applicable |
| Flux Core | Yes, Optional |
| Air Carbon Arc | No |
| 2T/4T /Torch latch/Trigger | Yes |
| Torch Type | MIG: North 36 series with yellow (.062") and red steel liner (.045") (Other liners available) |
| Other Features | Run-in Wire Jog Gas Purge PowerSet Mode Push-Pull Capability |
| Warranty | 5 year |
| Shipping Weight | 132 lbs |
| Part Number | CLN-313-PI-240 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


