Everlast Hurricane 220 MTS-C Bundle with PowerCart 375LF & NOVA Accessory Kit
Everlast Hurricane 220 MTS-C Bundle with PowerCart 375LF & NOVA Accessory Kit
In stock
The Hurricane is a complete welder for any shop. It offers MIG, TIG, and Stick welding performance while including a 40A plasma cutter. What more could it need? But we have added one more thing: welding cart to the already nearly complete package. This special discounted package combines the PowerCart 375LF, NOVA accessories upgrade kit and the Hurricane unit together so that you tackle any job within it's 225A TIG range.
About the Hurricane 220 MTS-C
The Hurricane 220 MTS-C is a true Multi-Process welder. In fact it is one of the first of its kind on the market with the ability to both weld and cut in the same compact unit. The unit actually offers you the abilility to MIG weld, AC/DC TIG weld, DC Stick Weld or Plasma Cut with a simple torch change and button press. The unit has the perfect size to be a serious contender for use in portable repair and general light fabrication operations.
Because of the Plasma capability, the unit can be taken anywhere and you'll always have what you need. You'll never need to load extra machines, or go off wishing you had brought something else to the jobsite. The right tool for the job is always at hand. With up to 225A of MIG and TIG welding power, you'll be able to weld most common items encountered in the field up to 5/16" in a single pass and up to 3/8 to 1/2" multi-pass. The 40A plasma offers enough cutting power to cut up to 1/2" cleanly and the ability to sever even more.
Due to the IGBT inverter design, the machine is compact enough to be placed in most service bodies for transport and can hold up to an 8" roll of wire, which is approximately 10 to 12 lbs of wire capacity. It's light enough to be picked up and transported by one person without the need for special loading equipment. The duty cycle of 35% at maximum output means the unit is ready for use and service without encountering long delays or interruptions in operation in every day welding activities.
Features & Benefits
- Exclusive! MIG, AC/DC Pulse TIG, Stick and Plasma Cutter design.
- Power-Set function features synergic function of all processes.
- High Frequency and Lift Start AC and DC TIG modes for a true "all in one" design.
- Digitally controlled operation in all modes improve control and dependability.
- Operator friendly panel without complicated hidden menus or adjustments with grouped controls.
- Manual Override of PowerSet function allows the user to adjust items like pre-flow/post-post flow/slope etc.
- Weld Aluminum, Stainless, or Steel with the MIG function with wire diameter from .030-035" (additional driver roll sizes and types available up to .045" as option).
- Save up to 16 different programs with memory function that provides easy saving and recall of your favorite settings.
- Synergic Spool gun operation capability with optional spool gun. Ideal for welding aluminum.
- TIG torch and Foot pedal included for TIG. Regulator included.
- Built in gas solenoid and connections for TIG eliminates need for gas valve torch used by competitors
- True DC CC/CV Multi-Process design eliminates needing or carrying multiple units for one job.
- AC capability on TIG allows user to weld aluminum. Industry first for this type design.
- Pulse TIG capability increases control and weld quality.
- Compact and light weight design makes the unit extremely portable, ideal for on-site fabrication.
- Adjustable Burn-back control keeps the wire energized after wire has stopped feeding to allow the wire to melt back to a desired length without retrimming wire before restarts.
- 8" Diameter wire spool capacity maintains portability while maintaining productivity.
- Adjustable MIG Wave arc force control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable stick Arc Force and New Hot Start controls allows the user to dial in desired Stick welding performance.
- TIG Up and Down slope allows the user to control the end of the welding cycle.
- 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
- Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality.
- 225 Amps of MIG and TIG power offer more than enough power to get the job done. 180 amps of stick welding power can be used with up to 5/32" welding rods.
- Dual Voltage design will operate on 120V or 240V. Output on 120V is limited to 125 amps MIG/TIG/ 100 amps Stick.
- Blow Back Pilot Arc for Plasma with up to 40A.
Standard Equipment
- SN-24 MIG Gun with 10 ft. (3m) cable and Euro style Quick Connector
- 26 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- Torch Switch MTS with 12.5 ft. cable and 7 Pin Male plug (MTS)
- IPT-40 Plasma Torch 14 ft. with Euro style Central Connector
- Ground Clamp with 6 ft. cable and 35 Dinse connector
- Electrode Stick Holder with 10 ft. cable and 35 Dinse connector
- RH-191 Argon/CO2 Flowmeter Regulator with Hose
- AW2000-02 Air Filter/Water Trap
- Foot Pedal with 25 ft. cable and 7 Pin Male plug (MTS)
- Drive Roll V Groove .035"-.045" (Double) (installed)
- PigTail Adapter 240V/120V
- Starter Plasma Consumable Kit
- Starter TIG Consumable Kit (tungsten not included)
Optional Equipment
- SM200N-MTS Spool Gun
- Various size V-Groove Drive Rolls (Hard Wire)
- Various size Flux Core Drive Rolls
- Various size U-Groove Drive Rolls (Aluminum Wire)
- NOVA Torch and Pedal Kit for LightningMTS 225
- PowerCool W401 Water Cooler
- PowerCart 375LF
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-Cooled 9/17/26 series TIG torches
- Water-Cooled 18/20 series TIG torches
- Amp Control TIG Torches
- TIG Consumables Kits
- Different MIG Guns
- MIG Consumables Kits
- Plasma Consumable Kits
Recommended Areas of Use
- Portable Repair On Road or Off Road
- Automotive garages/Muffler Shops
- Prototyping
- Motor Sports Facilities
- Construction sites
- HVAC
- Factory Maintenance
- Research/Education
- Fabrication shops
- Metal Art Fabrication
Recommended Metals
- Aluminum
- Steel
- Stainless
- Titanium
- Copper
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, AC/DC Tig, DC Stick, Plasma |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated MIG Amps | 225A |
| Max Rated TIG Amps | 225A |
| Max Rated Stick Amps | 180A |
| Maximum Rated Plasma Amps | 40A |
| MIG Amps/Volts @ Rated Duty Cycle | 120V: 125A/ 20.25V @ 35% (Rated at 40° C/104° F) 240V: 225A/25.3V @ 35% (Rated at 40° C/104° F) |
| TIG Output Amps/Volts @ Rated Duty Cycle | 120V: 125A/14.8V @ 60% (Rated at 40° C/104° F) 240V: 225A/19V @ 35% (Rated at 40°C/104° F) |
| Stick Amps/Volts @ Rated Duty Cycle | 120V: 100A/24V @ 35% (Rated at 40° C/104° F) 240V: 180A/27.2V @ 60% (Rated at 40° C/104° F) |
| Max Inrush ( I1MAX ) Amps | 120V: 28A 240V: 31A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 17A 240V: 16A |
| OCV | MIG/TIG/Stick: 64V Plasma: 250V |
| Plasma Output Amps/Volts @ Rated Duty Cycle | 120V: 25A/ 90V @ 60% (Rated at 40° C/104° F) 240V: 40A/ 96V @ 60% (Rated at 40° C/104° F) |
| MIG Output Range | 120V: 30-125A/ 15.5-20.25V 240V: 20-225A/ 15.5-25.3V |
| TIG Output Range | 120V: DC: 10-125A/ 10.4-15V 120V: AC: 20-125A/ 10.8-15V 240V: DC: 10-225A/ 10.4-19V 240V: AC: 20-225A/ 10.8-19V |
| Stick Output Range | 120V: 10-100A/20.4-24V 240V: 10-180A/ 20.4-27.2V |
| Plasma Output Range | 120V: 20-25A/88-90V 240V: 20-40A/88-96V |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse Frequency | TIG .5-150Hz |
| Pulse Time On | TIG .5-150Hz |
| Pulse Volts | TIG .5-150Hz |
| Standard Drive Roll wire size | .023”-.030” |
| Separate wire feeder | No, self contained |
| Number of Drive rollers | 2 |
| Max Wire Feed Speed | 120V: 425 IPM 240V: 600IPM |
| Max Wire Roll Diameter | 8” (up to 12 lb) |
| Upslope Time | 0-5S |
| Down Slope Time | 0-5S |
| Preflow time | 0-5S |
| Post Flow Time | 0-10S |
| Foot Pedal | Standard |
| Flux Core | Yes, Optional |
| Air Carbon Arc | No |
| 2T/4T /Torch latch/Trigger | Yes |
| Plasma Cutter Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | TIG: 26 Series Air-Cooled MIG: 24 Series Plasma: IPT 40 |
| Recommended Cutting Air Pressure | 65-72 PSI |
| Recommended Compressor Capacity | 30 gallon/5.2 CFH |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Other Features | High Frequency Start and Lift TIG start in TIG Mode Pulse TIG with AC and DC output for Aluminum, Steel, and Stainless Advanced Squarewave, Soft Square and Triangular AC TIG for advanced Aluminum welding capability. MIG and Spool Gun Stick Arc force Control Stick Hot Start Duration Control Stick Hot Start Intensity Control Power-Set Synergic mode for all processes |
| Warranty | 5 year |
| Shipping Weight | 172 lbs |
| Part Number | EV-HRCN220-BP#15 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


