Everlast Lightning MTS 212
Everlast Lightning MTS 212
In stock
The Lightning MTS 212 is a 210 Amp Multi-Process welder designed for use in applications where portability and space are of concern. To maximize usefulness, the unit can operate on 120V or 240V (with reduced output on 120V). The Lightning MTS 212 features AC/DC TIG, Stick and Spool gun capability. The digital design and generously sized HD TFT LCD color screen allow the user to easily interface and make both process selection and setup simple. All settings are visible on a single menu page. There's no complicated scrolling or pop ups to navigate through just to see or adjust your settings. And if you need to, you can name, save and lock up to 30 user defined programs for future use.
The units AC and DC TIG list of features give you everything you need, and nothing you don't. The unit features pulse in AC and DC up to 150 Hz, AC Balance Control, AC Frequency Control, Pre and Post Flow control, along with all the standard Start/End and Up/Down Slope controls found on many other Everlast products. For Stick you will find all the features you've come to expect from our brand like E 6010 capability, Hot Start and Arc force control. With up to 180A output, You will notice the smooth, stable arc quality allows you to weld with almost any electrode up to 5/32 with relative ease. As for the MIG capability of this unit, the unit features spool-gun capability. While the unit does not have an internal feeder, the unit can be used with our Parker DSP 240A spool guns. The unit is programmed to feed most wire types through the spool gun, including steel, stainless, and aluminum. It will even feed , 4" gas shielded (dual shield) wire up to .045" with the correct drive rolls. The long length of the spool gun makes the unit a perfect selection for a small shop or portable repair business. It is even at home in a small home garage where conserving space is important.
Features & Benefits
- Dual Voltage 120/240V 1 phase 50/60Hz
- 210A MIG and TIG OutPut
- 170A Stick Output
- Quick Connect Spool Gun for MIG
- AC and DC Pulse TIG
- Up to 150Hz AC and DC TIG Pulse
- Power Set Mode for all processes
- E6010 Capability
- Digital HD TFT Color Display along with full digital control of functions
- Single page menu for each process
- All settings are visible at a glance.
- Easy navigation with single design.
- Speed Control on Spool Gun for MIG
- Electronic HV Start for Touchless TIG]
- Live and Remote Types of Lift Start
- 2T and 4T Remote Capability
Standard Equipment
- 26 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- TIG Torch On/Off Switch with 12.5 ft. cable and 7 Pin Male Plug (MTS)
- Parker DSP 240 Spool Gun with Drive Roll U-Groove (aluminum) .040" (1.0mm), 25 ft. cable and Euro style Quick Connector
- Stick Electrode Holder with 10 ft. cable and 35 Dinse connector
- Ground Clamp with 10 ft. cable and 35 Dinse connector
- Starter Consumable TIG Kit (does not include tungsten)
- Foot Pedal MTS with 7 Pin Male Plug
- Argon Regulator with Argon Hose
- PigTail Adapter 110/220V
Recommended Areas of Use
- Portable Repair On Road or Off Road
- Automotive garages/Muffler Shops
- Motor Sports Facilities
- Construction sites
- HVAC
- Factory Maintenance
- Research/Education
- Fabrication shops
Recommended Metals
TIG:
- Steel
- Aluminum
- Stainless
- Chrome Moly
- Titanium
- Copper
MIG (Spool Gun):
- Steel
- Stainless
- Chrome Moly
- Aluminum
Stick:
- Steel
- Stainless
- Chrome Moly
- Aluminum
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, AC/DC Tig, DC Stick |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated MIG Amps | 120V: 125A 240V: 210A |
| Max Rated TIG Amps | 120V: 125A 240V: 210A |
| Max Rated Stick Amps | 120V: 100A 240V: 170A |
| MIG Amps/Volts @ Rated Duty Cycle | 120V: 125A/20.3V @ 60% Duty Cycle 104°F/40°C 240V: 210A/24.5V @ 60% Duty Cycle 104°F/40°C |
| TIG Output Amps/Volts @ Rated Duty Cycle | 120V: 125A/14.8V @ 60% Duty Cycle 104°F/40°C 240V: 210A/18.4V @ 60% Duty Cycle 104°/40°C |
| Stick Amps/Volts @ Rated Duty Cycle | 120V: 100A/24V @ 60% Duty Cycle 104°F/40°C 240V: 170A/26.8V @ 60% Duty Cycle 104°F/40°C |
| Max Inrush ( I1MAX ) Amps | 120V: 28A 240V: 28A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 23A 240V: 23A |
| OCV | 84V |
| MIG Output Range | 120V: 30-125A/15.5-20.3V 240V: 30-210A/24.5V |
| TIG Output Range | 120V: AC: 15-125A/10.6-15V DC: 5-125A/10.4-15V 240V: AC: 15-210A/10.6-24.5V DC: 5-210A/10.4-24.5V |
| Stick Output Range | 120V: 10-100A/20.4-24V 240V: 10-170A/20.4-26.8V (Stick Range is DC Only) |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse Frequency | TIG: 0-150Hz (No MIG Pulse) |
| Pulse Time On | 5-95% |
| Pulse Volts | 10-90% |
| Standard Drive Roll wire size | .040” and greater |
| Separate wire feeder | Yes |
| Max Wire Feed Speed | 60-600 IPM (Unit welds MIG with Spool gun only) |
| Max Wire Roll Diameter | 4” (2lb) |
| Memory | No |
| Foot Pedal | Standard |
| 2T/4T /Torch latch/Trigger | Yes |
| Torch Type | Parker DSP 240 (Spool Gun Only) |
| Other Features | MIG is via supplied spool gun only. There is no built in wire feeder. |
| Shipping Weight | 96 lbs |
| Part Number | LMTS-212 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


