Everlast Lightning MTS 225 with TIG Package
Everlast Lightning MTS 225 with TIG Package
In stock
When the very first MIG, TIG, Stick unit with AC/DC Pulse TIG capability series splashed on the market back in late 2016, it sent our competitors scrambling to come up with a competitive product. Now, in its third generation, the Lightning MTS 225 features upgrades to both performance and programming. Those familiar with the old unit can see that the unit has radically changed from the previous Lightning series. The unit now features a new bezel, panel layout and a 5.1" HD TFT LCD screen. The Lighting 225 MTS, alongside its big brother the Lightning MTS 275, continues to lead the industry in product innovation with a full spectrum of new, user-oriented features.
The Lighting MTS 225 excels in nearly every category when compared to similar competitor products, boasting 225A maximum output when operating in MIG and TIG modes. The new one-page design of the LCD screen programming allows the user to see all the settings at a glance. There's no scrolling through endless pages to make adjustments or confusing pop-up menus to wade through. The user has all parameters relating to the process condensed onto a single easy-to-read menu screen. This design also allows intuitive navigation and selection of parameters with the use of simple directional buttons on the panel.
The improved PowerSET function allows the customer to enter basic operating parameters such as wire diameter and plate thickness in MIG, TIG, or Stick mode which in turn automatically provides ball park settings for the user for most applications. The PowerSET mode offers preset settings of many values that are adjustable in manual mode. The Volts and Wire Feed Speed/ Amps are adjustable in case the settings provided don't exactly fit the application. (Volts are only adjustable in MIG and Flux-Cored Modes.)
This new unit also features a separate Flux-Core mode for operation with most common types of Flux Core wire (without gas/self shielding). For Aluminum welding the unit can now be equipped with several different models of push-pull guns in addition to a heavy-duty Parker DSP 360 spool gun. Separate Ar/CO2 mixed-gas and 100% CO2 modes help improve overall performance as well on steel. As powerful as the welder is, it is also capable of operating on 120V if the unit needs to be carried to the job site. As far as the operating on 240V, at the full rated 225A output, the TIG function features a duty cycle of 35% on AC or DC. In stick mode, the with output at the full 185A output the duty cycle is 35%, with a 60% rating at 160A, perfect for most 1/8" and 5/32" electrodes. At the maximum rated 225 amp output, the MIG function also features 35% duty cycle. For MIG, that means 1/4" and 5/16" welds are a breeze. Even 3/8" and 1/2" can be easily handled with multiple passes.
As for portability around the shop, be sure to add the PowerCart 375LF. It features heavy duty capability, supporting use with gas cylinders up to full-size 9" diameter cylinders. If you choose the stackable cooler option (the PowerCool 401), be sure to order the water-cooled torch package for this welder.
Features & Benefits
- MIG, AC/DC Pulse TIG, and Stick design with Power-Set.
- Power-Set function features synergic function of all processes for easy setup.
- High Frequency and Lift Start with Remote and Live Lift Start AC and DC TIG modes for a true "all in one" design.
- Digitally controlled operation in all modes improve control and dependability.
- Operator friendly panel without complicated hidden menus or adjustments with grouped controls.
- Full manual control allows the user to adjust all parameters independently like pre-flow/post-post flow/slope etc.
- Weld Aluminum, Stainless, or Steel with the MIG function with wire diameter from .035-.045" (additional driver roll sizes and types available as optional purchase).
- Save up to 16 different programs with memory function that provides easy saving and recall of your favorite settings.
- Synergic Spool gun operation capability with optional spool gun. Ideal for welding aluminum.
- TIG torch and Foot pedal included for TIG. Regulator included.
- Built in gas solenoid and connections for TIG eliminates need for gas valve torch used by competitors
- True DC CC/CV Multi-Process design eliminates needing or carrying multiple units for one job.
- AC capability on TIG allows user to weld aluminum. Industry first for this type design.
- Pulse TIG capability up to 250 Hz increases control and weld quality.
- Compact and light weight design makes the unit extremely portable, ideal for on-site fabrication.
- Adjustable Burn-back control keeps the wire energized after wire has stopped feeding to allow the wire to melt back to a desired length without retrimming wire before restarts.
- 8" Diameter wire spool capacity maintains portability while maintaining productivity.
- Adjustable MIG Wave arc force control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable stick Arc Force and New Hot Start controls allows the user to dial in desired Stick welding performance.
- TIG Up and Down slope allows the user to control the end of the welding cycle.
- 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
- Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality.
- 225 Amps of MIG and TIG power offer more than enough power to get the job done. 185 amps of stick welding power can be used with up to 1/8" welding rods.
- Dual Voltage design will operate on 120V or 240V. Output on 120V is limited to 125 amps MIG/TIG/ 100 amps Stick.
- Electronic HV (HF) Start with Live Lift and Lift with Remote starting
Standard Equipment
- 24 series MIG Gun with 10 ft. cable and Euro style quick connector
- 26 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- TIG Torch On/Off Switch with 12.5 ft. cable and 7 Pin Male Plug (MTS)
- Stick Electrode Holder with 10 ft. cable and 35 Dinse connector
- Ground Clamp with 10 ft. cable and 35 Dinse connector
- Starter Consumable TIG Kit (does not include tungsten)
- Foot Pedal MTS with 7 Pin Male Plug
- RH-191 Argon Regulator with Gas Hose
- PigTail Adapter 110/220V
- Drive Roll V Groove .035"-.045" (Double)
- (Cooler and Cart NOT included)
Optional Equipment
- V Groove Drive Rolls (Hard Wire)
- Flux Core Drive Rolls
- U Groove Drive Rolls (Aluminum Wire)
- NOVA Torch and Pedal Kit for Lightning MTS 225
- Foot Pedal
- NOVA Slider AMP Control
- Protective Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-Cooled 9/17/26 series TIG Torches
- Water-Cooled 18/20 series TIG Torches
- Amp Control TIG Torches
- TIG Consumables Kits
- MIG Guns
- MIG Consumables Kits
- PowerCool W401 Water Cooler
- PowerCart 375LF
- Parker DSP 360 Spool Gun
- Everlast Premium Push-Pull Gun
Recommended Areas of Use
- Portable Repair On Road or Off Road
- Automotive garages/Muffler Shops
- Motor Sports Facilities
- Construction sites
- HVAC
- Factory Maintenance
- Research/Education
- Fabrication shops
Recommended Metals
TIG:
- Steel
- Aluminum
- Stainless
- Chrome Moly
- Titanium
- Copper
MIG:
- Steel
- Stainless
- Chrome Moly
- Aluminum (Spool Gun)
Stick:
- Steel
- Stainless
- Chrome Moly
- Aluminum
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, DC TIG, DC Stick |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated MIG Amps | 120V @ 125A 240V @ 225A |
| Max Rated TIG Amps | 120V @ 125A 240V @ 225A |
| Max Rated Stick Amps | 120V @ 100A 240V @ 185A |
| MIG Amps/Volts @ Rated Duty Cycle | 120V: 125A/21.5V @ 35% Duty Cycle/40º C 100A/19V @ 60% Duty Cycle/ 40º C 80A/18V @ 100% Duty Cycle/ 40º C 240V: 225A/25.3V @ 35% Duty Cycle/40º C 170A/22.5V @ 60% Duty Cycle/40º C 130A/20.5V @ 100% Duty Cycle/ 40º C |
| TIG Output Amps/Volts @ Rated Duty Cycle | 120V: 125A/14.8V @ 60% Duty Cycle/40º C 100A/14V @ 100% Duty Cycle/40º C 240V: 225A/19V @ 35% Duty Cycle/40º C 200A/18V @ 60% Duty Cycle/ 40º C 160A/16.4V @ 100% Duty Cycle/ 40º C |
| Stick Amps/Volts @ Rated Duty Cycle | 120V: 100A/24V @ 35% Duty Cycle/ 40º C 80A/23.2V @ 60% Duty Cycle/ 40º C 60A/22.4V @ 100% Duty Cycle/ 40º C 240V: 185A/27.4V @ 35% Duty Cycle/ 40º C 160A/26.4V @ 60% Duty Cycle/ 40º C 130A/25.2V @ 100% Duty Cycle/40º C |
| Max Inrush ( I1MAX ) Amps | @120V: 28A @240V: 31A |
| Maximum Rated (I1EFF ) Input Amps | @120V: 17A @240V: 16A |
| OCV | MIG: 70V TIG: 70V Stick: 70V |
| MIG Output Range | 120V: 30-125A/15.5V-20.3V 240V: 30A-225A/15.5V-25.3V |
| TIG Output Range | 120V; DC: 10-125A; 10.4-15V AC: 20-125A; 10.8- 15V 240V: DC: 10-225A; 10.4-19V AC: 20A-225A; 10.8-19V This unit is AC and DC capable (High Frequency or Lift Start operation) |
| Stick Output Range | 120V: 10-100A/20.4V-24.8V 240V: 10A-185A/20.4V-27.4V |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse | No |
| Pulse Frequency | TIG .5-250Hz |
| Pulse Time On | TIG: 5-95% |
| Pulse Volts | 5-95% of TIG Amps |
| Separate wire feeder | No, self contained |
| Number of Drive rollers | 2 |
| Max Wire Feed Speed | 120V: 400 IPM 240V: 600IPM |
| Max Wire Roll Diameter | 8” (up to 12 lb) |
| Memory | Yes |
| Upslope Time | 0- 5 Seconds |
| Down Slope Time | 0-5 Seconds |
| Preflow time | 0-5 Seconds |
| Post Flow Time | 0-10 Seconds |
| Foot Pedal | Standard |
| Flux Core | Yes, Optional |
| Air Carbon Arc | No |
| 2T/4T /Torch latch/Trigger | Yes |
| Other Features | Electronic High Voltage, High Frequency Start and Lift TIG start in TIG Mode (No Points to Maintain) Pulse TIG with AC and DC output for Aluminum, Steel, and Stainless Advanced Square wave, Soft Square and Triangular AC TIG for advanced Aluminum welding capability. MIG and Synergic MIG Stick Arc force Control Stick Hot Start Duration Control Stick Hot Start Intensity Control Power-Set Synergic mode for all processes Standard Drive Roll Size .030-.035" |
| Warranty | 5 year |
| Shipping Weight | 106 lbs |
| Part Number | LMTS-225 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

