Everlast Lightning MTS 275-P TIG/MIG Pulse with TIG Package
Everlast Lightning MTS 275-P TIG/MIG Pulse with TIG Package
In stock
This version of the long running Lightning MTS 275 now includes Synergic Single Pulse Operation. The Single Pulse programming of this welder is perfect for heat management on sensitive materials. It also reduces spatter and improves travel speed when used. Of course it still carries the same "fully loaded" MIG, AC/DC Pulse TIG and DC Stick features of previous versions. But now, the new "Pulse" version offers truly about anything and everything most shops will every dream of. It truly carries on the legacy. This new unit features improved synergic function from previous models and simplified setup with more accurate settings than before. All settings are visible on a single page. No hidden menus, no popups to wade through. With enhanced program memory, you can now name, save and lock up to 30 operator created programs.
The Lightning 275 Pulse features more output and better duty cycle than any of its current competitors. It packs a whopping punch with 275A of MIG output which making it perfect for Pulsed Spray, Short Circuit and Spray Arc MIG welding. The revised design removes all hidden menus and bottle necks during setup. All settings are visible on one page at one time, which helps the user to always know what to expect from the unit when welding. The improved PowerSET function allows the customer to enter basic operating parameters in MIG, TIG, or Stick mode, and automatically selects the proper Amps and Volts (where applicable) for the user. This new unit also features a two types of Flux-Cored operation with both gas shielded and gasless Flux-cored settings. Separate settings for Aluminum and Stainless are featured as well. As with the previous generations, it is still capable of operating on 120V if the unit needs to be carried to the jobsite. Of course, you'll have reduced output, but you will not suffer for lack of available duty cycle. As far as operating duty cycle at full-tilt output, the machine delivers a industry leading 60% duty cycle in MIG, TIG and Stick modes at maximum rated output. Stick mode output has improved to 220A as well and can weld with nearly any welding rod including E6010. Stepping down just a notch on power, in both MIG, and TIG modes at 200 Amps, you'll have a heavy industrial rating of 100% duty cycle. For Stick, at 175 Amps, you'll have 100% Duty Cycle available to weld the full 10 minute cycle. The unit also now includes push-pull gun capability which expands the job-site versatility of this welder. In the latest generation, the unit also has received a HV start system that has replaced the old HF point gap design for better starting efficiency.
Features & Benefits
- Fully revised PowerSET function for easy MIG, AC-DC TIG, and DC Stick Setup
- Synergic Single Pulse MIG also works with PowerSet Mode
- Large, easy to read 5.1 720 HD TFT resolution TFT Digital Screen
- Displays multiple relevant settings simultaneously, allows quick adjustment
- Electronic, No Point High Voltage (Same function as HF) Start along with both Live and Remote Lift Start in AC and DC TIG modes for a true "all in one" design
- Digitally controlled operation in all modes improve control and dependability.
- Operator friendly panel without complicated hidden menus or adjustments with grouped controls.
- The graphically assisted PowerSET function allows the user to fine tune settings with a reduced risk of creating unworkable settings by providing unique graphics to warn and indicate to the user that the settings chosen may not operate well.
- Polarity and Gas reminders are constantly on-screen during use.
- Weld Aluminum, Stainless, or Steel with Synergic MIG function with wire diameter from .023- .045" (for full range of sizes and flux core use, purchase optional drive rolls).
- Memory function provides easy saving and recall of your favorite settings.
- Spool gun with PowerSET function with optional spool gun. Ideal for welding aluminum.
- TIG torch and Foot pedal included for TIG. Regulator included.
- Built in dual gas solenoid and connections for TIG eliminates need for gas valve torch used by competitors
- True DC CC/CV Multi-Process design eliminates needing or carrying multiple units for one job.
- AC capability on TIG allows user to weld aluminum. Industry first for this type design.
- Pulse TIG capability with three Pulse Wave forms increases control and weld quality.
- Compact and light weight design makes the unit portable, ideal for on-site fabrication, if needed.
- Adjustable Burn-back control keeps the wire energized after wire has stopped feeding to allow the wire to melt back to a desired length without retrimming wire before restarts.
- 12" Diameter wire spool capacity maintains portability while maintaining productivity.
- Adjustable MIG Wave arc force control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable stick Arc Force and New Hot Start controls allows the user to dial in desired Stick welding performance.
- TIG Up and Down slope allows the user to control the end of the welding cycle.
- 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
- Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality.
- 275 Amps of MIG and TIG power offer more than enough power to get the job done. 20 amps of stick welding power can be used with up to 3/16" welding rods.
- Dual Voltage input design will operate on 120V or 240V. Output on 120V is limited to 150 amps MIG/TIG/ 120 amps Stick.
- AC TIG Wave form control with Advanced Square, Triangular, and Soft Square Waves.
- Spool Gun and Push Pull Gun Ready.
Standard Equipment
- 18 series Water-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- Torch Switch MTS with female plug
- 36 MIG Gun with 10 ft. cable and Euro style quick connector
- Stick Electrode Holder with 10 ft. cable and 35 Dinse connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- Starter TIG Consumable Kit (does not include tungsten)
- Foot Pedal 22K
- RH-191 Argon Regulator with Hose
- Drive Roll V Groove .035"-.045" Double Drive (installed)
- (Cooler and Cart NOT included)
Optional Equipment
- Parker DSP 360 Spool Gun
- Parker SGP 360A Push Pull Gun
- Various size V Groove Drive Rolls (Hard Wire)
- Various size Flux Core Drive Rolls
- Various size U Groove Drive Rolls (Aluminum Wire)
- NOVA Torch and Pedal Kit for Lightning MTS 275
- PowerCool 401 Water Cooler
- PowerCart 301
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-Cooled 9/17/26 series TIG torches
- Water-Cooled 18/20 series TIG torches
- Amp Control TIG torches
- TIG Consumables Kits
- Different MIG Guns
- MIG Consumables Kits
Recommended Areas of Use
- Portable Repair On Road or Off Road
- Automotive garages/Muffler Shops
- Motor Sports Facilities
- Construction sites
- HVAC
- Factory Maintenance
- Research/Education
- Fabrication shops
Recommended Metals
TIG:
- Steel
- Aluminum
- Stainless
- Chrome Moly
- Titanium
- Copper
MIG:
- Steel
- Stainless
- Chrome Moly
- Aluminum (Spool Gun)
Stick:
- Steel
- Stainless
- Chrome Moly
- Aluminum
Specifications
| Type | Digital/Micro-controlled IGBT Inverter |
| Output /Process Type | MIG, AC/DC Tig, DC Stick |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated MIG Amps | 120V @ 150A 240V @ 275A |
| Max Rated TIG Amps | 120V @ 150A 240V @ 275A |
| Max Rated Stick Amps | 120V @ 120A 240V @ 200A |
| MIG Amps/Volts @ Rated Duty Cycle | 120V: 150A/21.5V @ 60% Duty Cycle/40º C 120A/20V @ 100% Duty Cycle/40º C 240V: 275A/27.8V @ 60% Duty Cycle/ 40º C 250A/26.5V @ 60% Duty Cycle/40º C |
| TIG Output Amps/Volts @ Rated Duty Cycle | 120V: 150A/16V @ 100% Duty Cycle/40º C 240V: 275A/21V @ 60% Duty Cycle/40º C 250A/20V @ 100% Duty Cycle/40º C |
| Stick Amps/Volts @ Rated Duty Cycle | 120V: 120A @ 60% Duty Cycle/ 40º C 100A @ 100% Duty Cycle/ 40º C 240V: 220A @ 60% Duty Cycle/ 40º C 175A @ 100% Duty Cycle/ 40º C |
| Max Inrush ( I1MAX ) Amps | @120V: 43A @240V: 52A |
| Maximum Rated (I1EFF ) Input Amps | @120V: 34A @240V: 41A |
| OCV | MIG: 80V TIG: 80V Stick: 80V |
| MIG Output Range | 120V: 30-150A/15.5V-21V 240V: 30A-275A/15.5V-27.8V |
| TIG Output Range | 120V: DC 10-150A 120V: AC 15-150A 240V: DC 10A-275A 240V: AC 15A-275A This unit is AC and DC capable (High Frequency or Lift Start operation) |
| Stick Output Range | 120V: 10-120A 240V: 10A-200A |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | Yes |
| Pulse | Single |
| Pulse Frequency | Synergic Single MIG Pulse automatically controls Pulse Frequency Range based on User Input Parameters TIG Standard AC and DC Pulse and Advanced AC Pulse : Standard AC/DC TIG Pulse: .5-150Hz Advanced TIG AC Pulse: .5-10 Hz |
| Pulse Time On | TIG: 5-95% |
| Pulse Volts | 3-95% of TIG Amps |
| Standard Drive Roll wire size | .035”-.045” |
| Separate wire feeder | No, self contained |
| Number of Drive rollers | 4 |
| Max Wire Feed Speed | 120V: 60-400 IPM 240V: 60-600 IPM |
| Max Wire Roll Diameter | 12” (full size up to 44lb) |
| Memory | Yes |
| Upslope Time | TIG: 0- 10 Seconds MIG (Run-in):0-1 Seconds |
| Down Slope Time | TIG: 0-10 Seconds MIG (Crater Fill): 0-2 Seconds |
| Preflow time | 0-10Seconds |
| Post Flow Time | 0-10 Seconds |
| Foot Pedal | Standard |
| Flux Core | Yes, Optional |
| Air Carbon Arc | No |
| 2T/4T /Torch latch/Trigger | Yes |
| Other Features | Electronic High Voltage (High Frequency Type) Start with both Live and Remote Lift TIG start in TIG Mode Synergic Single Pulse MIG Pulse TIG with AC and DC output for Aluminum, Steel, and Stainless Advanced AC Pulse (mix of AC and DC-) improves high end penetration and low end handling Advanced Squarewave, Soft Square Wave, Triangular and Sine Wave AC TIG for advanced Aluminum welding capability. MIG with Inductance Control Stick Arc force Control Stick Hot Start Duration Control Stick Hot Start Intensity Control E6010 setting with hot start Spot Time .5-15 Seconds Stitch Time 0-15 Seconds TIG AC Frequency 20-200Hz TIG AC Balance 30-70% of EP Burn Back Time 0-2 Seconds Inductance/Arc Force 1-100% All new Synergic Power Set Feature 5.1" Digital 720 Resolution TFT Display NEW and IMPROVED Power Set/Synergic Feature in all modes Push-Pull Capable for Aluminum |
| Warranty | 5 year |
| Shipping Weight | 243 lbs |
| Part Number | LMTS-275-P |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

