Everlast PowerArc 161STH
Everlast PowerArc 161STH
In stock
If you've been in the hunt for a well priced, well balanced and moderately powerful DC stick and TIG welder, then you know that pickings are slim. You can find a well priced unit, but does it honestly have everything you might someday need? Sure, it will work and get you by for now. But do you want that nagging feeling of wishing you could have gotten more in the way of features and performance? If this sounds familiar, then you might appreciate the fact that in our redesign of our PowerARC line, we did not forget about you. The new PowerARC 161STH offers you about everything you could want, but does not overwhelm you with things that, well you might need a engineering degree to figure out. The new digitally controlled PowerARC 161STH was designed to be a clear improvement over the older analog PowerARC 160STH, without sacrificing the things that made the older unit so popular. We took quite a while to develop this new product, and while doing so, we listened to our customers "wish list" of ideas that they had about their units and tried to implement them in a simple, intuitive way in this new unit. One thing is clear, the older PowerARC 160STH favored TIG more than stick performance. With this new model, both stick and TIG performance shine equally well. As far as added Stick features go, the most noticeable is the addition of the 6010/Cellulose capability. This is welcome news for those pros wanting to use this machine for pipeline or portable repair. 6010 and 6011 are go-to rods when fitup and rust are problems. So we improved the stick performance and went with this added feature. But also, we added in other features such as VRD (voltage reduction) and anti electrode stick for safety. And now the welder will let you choose how much arc force and hot start you use so you can tailor the arc performance to your welding style and operating environment, instead of having it preset at the factory.
As far as TIG features go, well, what more could you want in a basic DC TIG welder? Along with the HF start that was standard in the older model, we've added Lift start and a new "Live Lift" which allows you to keep the Tungsten "live" when a foot pedal or a torch switch isn't an option. Also, we've added a preflow and downslope to go along with the post flow of the older model to make the unit complete. Well, almost complete. Now you have the option of selecting 2T or 4T switch operation, to more precisely control the arc cycle when TIG welding, which really does round out the unit and it's capability.
Oh, wait! Did we mention, that the new PowerARC 161STH also has a simple-to-use Pulse function, which offers adjustable pulse frequency? No? Well if you weren't fully convinced before that the PowerARC 161STH does you everything you could need in a small DC welder, then we sincerely hope that you are convinced now.
Take a look around if you haven't and take time to compare. But if you have and if you are looking at other "161" or "160" type units, you will be hard pressed to find something more at a price point anywhere near this unit's price. Check out all the details below for more and complete info on this new, well rounded competitor.
Features & Benefits
- Stable, smooth DC arc
- Digital IGBT inverter
- Low power consumption
- Complete Stick/TIG welding package with carry case
- Adjustable hot start for improved arc striking
- Adjustable arc force control
- VRD and Anti-Stick feature for Stick safety
- 120V/240V Dual Voltage
- Optional 22k Ohm foot pedal for TIG
- Adjustable pre/post flow and downslope control for TIG
- Pulse for TIG
- 10-160 amps operating range (240V)
- HF Start TIG with automatic gas flow solenoid.
Standard Equipment
- 17 series Air-Cooled TIG torch with 12.5 ft. cables and 25 Dinse connector
- Torch Switch for 2T/4T operation 12.5 ft. cable and 7 Pin Female plug
- Stick Electrode Holder with 10 ft. cable and 25 Dinse connector
- Ground Clamp with 10 ft. cable and 25 Dinse connector
- Argon Regulator with Hose
- Starter TIG Consumable Kit (tungsten not included)
- 120V/240V Adapter
- Impact resistant carry case
Optional Equipment
- NOVA Kit for PowerArc 161STH
- 9/17/26 series Air-Cooled TIG Torches
- Amp Control TIG Torches
- TIG Consumables
- NOVA Slider AMP Control
- Foot Pedal
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home/Hobby garage
- Maintenance shop
- MotorSports/Off-Road
- Fabrication/ Proto-typing
- Portable Welding Repair
- Automotive Repair
Recommended Metals
- Steel
- Stainless
- Chrome Moly
- Cast Iron
- Aluminum ( Stick welding only. See product notes.)
Specifications
| IGBT Type | Individual IGBT |
| Inverter Type | Digital/Micro-controlled |
| Output Type | DC Stick, DC TIG |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated TIG Amps | @ 120V: 90A @240V: 160A |
| Max Rated Stick Amps | @ 120V: 90A @ 240V: 160A |
| TIG Amps @ Rated Duty Cycle | 240V: 160A/16.4V @ 35% Duty Cycle/ 40º C 130A/15.2V @ 60% Duty Cycle/ 40º C 100A/14V @ 100% Duty Cycle/ 40º C 120V: 90A/13.6V @ 35% Duty Cycle/ 40º C 70A/12.8V @ 60% Duty Cycle/ 40º C 55A/12.2V @ 100% Duty Cycle/ 40º C @ 60% Duty Cycle/ 40º C 55A/12.2V @ 100% Duty Cycle/ 40º C |
| Stick Amps @ Rated Duty Cycle | 240V: 160A/26.4V @ 35% Duty Cycle/ 40º C 130A/25.2V @ 60% Duty Cycle/ 40º C 100A/24V @ 100% Duty Cycle/ 40º C 120V: 90A/23.6V @ 35% Duty Cycle/ 40º C 70A/22.8V @ 60% Duty Cycle/ 40º C 55A/22.2V @ 100% Duty Cycle/ 40º C |
| Max Inrush ( I1MAX ) Amps | 120V: 29.7A 240V: 28.8A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 18A 220V: 17A |
| OCV | Stick: 70V TIG: 70V |
| TIG Output Range DC | 120V: 10A-90A/ 10.2V-13.6V 240V: 10A-160A/ 10.2V-16.4V |
| Stick Ouput Range DC | 120V: 10A-90A/ 20.2V-23.6V 240V: 10A-160A/ 20.6V-26.4V |
| Stick Hot Start Amps | 0-100% |
| Stick Function | Adjustable Arc Force Control |
| Stick Hot Start Type | Adjustable Hot Start |
| Stick Hot Start Time | 0-2 Seconds |
| 6010/Cellulose Capable | Yes |
| Minimum Amp DC TIG Start | 10A |
| TIG Start Type | High Frequency Lift TIG Live Lift |
| Memory | No |
| Down Slope Time | 0-10 Seconds |
| Preflow time | 0-25S |
| Post Flow Time | 0-25S |
| TIG Pulse | Yes |
| Standard DC Pulse Frequency | Adjustable .1-250Hz |
| Pulse Time On (Duty Cycle) | Preset |
| Pulse Amp Range | Preset |
| Remote Control | 2T/4T |
| Foot Pedal | Optional |
| Warranty | 5 year |
| Shipping Weight | 37 lbs |
| Part Number | PA-161STH |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


