Everlast PowerPlasma 52i
Everlast PowerPlasma 52i
In stock
For customers looking for a compact, but reliable plasma cutter, the PowerPlasma 52i offers the latest in IGBT inverter design technology. The PowerPlasma 52i is the successor to the popular and long running PowerPlasma 50S series which brought affordability and performance to the plasma cutter market place and gave customers a real choice. Nothing has changed in that respect about the new PowerPlasma 52i. The new PowerPlasma 52i has been completely redesigned though, offering full digital design, inside and out. This has reduced circuit complexity, and improved reliability. But it has also brought some new features which improve upon the solid platform of the PowerPlasma Series. The new addition of the air-pressure guide system, offers digital display of actual air-pressure along with a LED system that guides the operator to the best choice of air pressure for the mode being used. This new setup also features a digital control over Post-Flow and gives the user the ability to see and set the actual post flow time with a digital readout. It can be adjusted for different duty and job requirements. The Post-Flow can be easily increased to preserve consumable life for those long, time consuming cuts. Or if you are doing rapid, short, or intermittent cuts, the Post-Flow time can be adjusted lower by just a quick twist of the dial. The large digital displays are super bright, with improved visibility in bright conditions, making them easy to read at a distance. Adding to the already long list of improvements, the PowerPlasma 52i, now has a gouge feature and a separate mode for CNC use. The blow-back torch design features two pilot arc modes, one with continuous re-light for cutting expanded metal and for conditions where continuity is not ideal, and the other which features a tip saver function that limits pilot arc on time to preserve consumable life.
Features & Benefits
- Dual Voltage 120/240V for maximum portability
- Adjustable Post-Flow timer extends consumable and torch life
- Large, Super bright digital displays for Amps, Air Pressure, and Post Flow
- Digital Air Pressure Setting Guide adapts programming for different cutting modes
- Separate Gouge and CNC modes.
- Euro style "Central" quick connect torch adapter
- Improved Consumable life
- Features the Italian designed "back striking" iPT 60 torch with improved cutting capacity and improved consumable life
- Inexpensive consumables can usually be bought locally
- 60% duty cycle is fit for commercial use
- Clean cuts and less bevel with the iPT 60 torch and new digitally controlled cutting arc.
- Self-Diagnosing mode (Error Code)
- Consumables in Place Indicator.
- Pilot arc tip saver feature limits pilot arc activity to 3 seconds. Continuous Pilot arc mode is standard as well.
- Can be used with 8500 watt clean power generators (less than 5% total harmonic distortion)
Standard Equipment
- IPT-60 Handheld Torch with 14 ft. cable and Euro style Central connector
- Ground Clamp with 10 ft. cable and 25 Dinse connector
- AW2000-02 Air Filter / Water Trap (gauge is not included)
- Air Hose
- WEiPU SP21 CNC Connector 12 Pin
- Starter Consumable Kit: 5x IPT-60 Electrodes and 5x IPT-60 1.1mm Nozzles/Tips
- PigTail Adapter 120V/240V
Optional Equipment
- Protective Cover
- PowerCart 250
- IPT-60 Plasma Torch 24 ft
- PTM-60 Plasma (CNC) Machine Torch
- IPT-60 Plasma Consumables Kits
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home/Hobby
- Metal Art
- Farm/Ranch
- Contstruction sites
- Portable Repair
- Fabrication
- Small CNC tables with 1/4" or less capacity is needed continuously
- Anywhere Oxy Fuel cutting is impractical, slow, expensive, or otherwise restricted or undesirable.
Recommended Metals
- Steel
- Stainless
- Aluminum
- Titanium
- Virtually all types of metal
Specifications
| Type | IGBT |
| Voltage/phase | Dual Voltage 120/240 1 Phase |
| Output Amp/Volt Range | 120V: 20A/88V-25A/90V 240V: 20A/88V-50A/100V |
| OCV | 200V |
| Max Inrush ( I1MAX ) Amps | 120V: 32.1A 240V: 35.8A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 24.9A 240V: 27.9A |
| Duty Cycle At Rated Amps/Volts | 120V: 60% @ 25A/90V 240V: 60% @ 50A/100V |
| Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | Italian designed iPT 60 |
| CNC Interface Port | Yes |
| Adjustable Post Flow Timer | Yes |
| Gouging | Light or occasional |
| Recommended Cutting Air Pressure | 72-75 psi |
| Recommended Compressor Capacity | 5.0 cfm or better with 25 gallon tank |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Warranty | 5 year |
| Shipping Weight | 40 lbs |
| Part Number | PP-52I |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


