Everlast PowerPlasma 62i
Everlast PowerPlasma 62i
In stock
If you are wanting more power, unquestionable cut quality, and reliabilty in a plasma cutter, but you just can't justify spending your green for something that is gray, the PowerPlasma 62i is the answer. As the all new replacement for the ever popular PowerPlasma 60S, the PowerPlasma 62i has been built around a reliable, tested all digital inverter platform. This allows the unit to do more with less circuitry and points of failure than ever before. This plasma cutter though has kept all of the old features and added many new ones, so nothing was sacrificed in the way of features. The display has been upgraded to offer large, easy to read numbers even in bright light. The new addition of digital readouts for both the Post-Flow time and the Air-Pressure has added to the plasma cutter's operator oriented design. Along with a digital display for the air pressure, the unit features an color coded LED guide system that helps you to properly set the air pressure for each cut mode without having to refer to a chart or manual. A new gouge feature has been added for cutting out metal defects and old welds. Also, a separate function has been added for CNC operation.
Features & Benefits
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- NEW! Digitally controlled design that closely manages cutting arc
- NEW! Super bright displays, readable in bright light conditions
- NEW! Gouge function
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial class, 60% Duty cycle at 60 amps
- Clean, smooth cuts with the genuine iPT 60 Torch
- Blowback start starts are fast and reliable
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation if no cutting is present to prevent premature consumable wear
- Digital Air Pressure Display, and LED Air Pressure guide system adapts to different cut modes for best air pressure setting without consulting a manual or chart
- Self-diagnosing
- Adjustable postflow timer with digital display for maximum consumable life and ease of use.
- The name brand IGBT's are digitally controlled which increases cut quality and consumable life.
- CNC socket and new, separate CNC cut mode for CNC use on plasma tables (machine torch optional)
- Suitable for use with 11,000 W "clean power" generators.
Standard Equipment
- IPT-60 Handheld Torch with 14 ft. cable and Euro style Central connector
- Ground Clamp with 10 ft. cable and 25 Dinse connector
- AW2000-02 Air Filter / Water Trap (gauge is not included)
- Air Hose
- WEiPU SP21 CNC Connector 12 Pin
- Starter Consumable Kit: 5x IPT-60 Electrodes and 5x IPT-60 1.1mm Nozzles/Tips
Optional Equipment
- Protective Cover
- IPT-60 Plasma Torch 24 ft
- PTM-60 Plasma CNC/Machine Torch
- IPT-60 Plasma Consumables Kits
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home shop
- Automotive/muffler shops
- Motosports
- Farm/Ranch
- Commercial fabrication
- Factory maintenance
- Shipyards
- Pipelines
- HVAC
- CNC
Recommended Metals
- Steel
- Stainless
- Aluminum
- Copper
- Titanium
- Nickel/Nickel alloys
- Virtually any metal including cast iron
Specifications
| Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| Output Amp/Volt Range | 20-60A; 88-104V |
| OCV | 240V |
| Max Inrush ( I1MAX ) Amps | 41A |
| Maximum Rated (I1EFF ) Input Amps | 32.4A |
| Duty Cycle At Rated Amps/Volts | 60% @ 60A/104V 100% @ 50A/100V |
| Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | Italian designed iPT 60 |
| CNC Interface Port | Yes |
| Adjustable Post Flow Timer | Yes |
| Gouging | Light to Medium |
| Recommended Cutting Air Pressure | 75 psi |
| Recommended Compressor Capacity | 6CFM @ 90 psi/ 30 gallon tank |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Warranty | 5 year |
| Shipping Weight | 74 lbs |
| Part Number | PP-62I |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


