Everlast PowerPlasma 62i with CNC Package
Everlast PowerPlasma 62i with CNC Package
In stock
Finally, it is here. The proven PowerPlasma 62i is now available in a CNC only package. This unit comes with all the basics to get started with your Plasma table, including CNC port, and CNC torch. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table. The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3/8" regular cuts, maximum clean cut capability is up to 3/4" (at reduced speeds). Pierce up to 5/16" for production cutting. The new PTM-60 CNC torch is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
Features & Benefits
- Comes with CNC torch (Hand torch not included)
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial class, 60% Duty cycle at 60 amps for CNC use
- Clean, smooth cuts with the genuine iPTM 60 CNC torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Front air pressure gauge allows quick verification of air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- Adjustable postflow timer for maximum consumable life
- IGBT components improve reliability and performance while reducing overall weight
- CNC socket for CNC use on plasma tables with included machine torch
- Suitable for use with 11,000 W "clean power" generators.
Standard Equipment
- PTM-60 CNC/Machine Torch with 24 ft. cable and Euro quick-connect central connector
- Ground Clamp with 10 ft. cable and 25 Dinse connector
- AW2000-02 Air Pressure Regulator/Water Trap (separate air dryer is required to reduce consumable wear and prevent torch damage)
- Starter Consumable Kit: 5x IPT-60 Electrodes and 5x IPT-60 1.1mm Nozzles/Tips
Optional Equipment
- Protective Cover
- IPT-60 Hand Held Plasma Torch 14 ft
- IPT-60 Hand Held Plasma Torch 24 ft
- IPT-60 Plasma Consumables Kits
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home shop
- Automotive/muffler shops
- Motosports
- Commercial fabrication
- Factory maintenance
- Shipyards
- Pipelines
- HVAC
- CNC
Recommended Metals
- Steel
- Stainless
- Aluminum
- Copper
- Titanium
- Nickel/Nickel alloys
- Virtually any metal including cast iron
Specifications
| Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| Output Amp/Volt Range | 20-60A; 88-104V |
| OCV | 240V |
| Max Inrush ( I1MAX ) Amps | 41A |
| Maximum Rated (I1EFF ) Input Amps | 32.4A |
| Duty Cycle At Rated Amps/Volts | 60% @ 60A/104V 100% @ 50A/100V |
| Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | Italian designed iPT 60 CNC machine torch |
| CNC Interface Port | Yes |
| Adjustable Post Flow Timer | Yes |
| Gouging | Light to Medium |
| Recommended Cutting Air Pressure | 75 psi |
| Recommended Compressor Capacity | 6CFM @ 90 psi/ 30 gallon tank |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Warranty | 5 year |
| Shipping Weight | 74 lbs |
| Part Number | PP-62I-CNC |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


