Everlast PowerPlasma 82i with CNC Package
Everlast PowerPlasma 82i with CNC Package
In stock
If you are looking for a professional level plasma table machine that you aren't likely to quickly out grow, the Everlast PowerPlasma 82i with the CNC package is likely the one that you'd choose. The portability, power, and performance, combine with the price to make the PowerPlasma 82i one of the best choices available in it's class when you consider power/purchase cost ratios. You get the best cut per amp per dollar paid for the PowerPlasma 82i CNC over any other 80 amp cutter in it's class. For routine daily use, the unit is recommended for cutting 5/8" thick plate metal. And for maximum cut capability on CNC, this unit is capable of producing quality cuts of 1" or greater (at reduced speeds). Considering the purchase price, where else will you find a plasma cutter ready for plasma table use with a built in CNC socket and CNC torch? Regarding portability, the unit's size is compact and can be easily stored or placed near the work area. The new Italian designed PTM-80 CNC/machine torch is rugged and features improved consumable life with the patented "back striking" design. This blowback design torch comes with a variety of consumable choices, shielded and unshielded. True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop plasma table or garage.
Features & Benefits
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial/Industrial class, 60% Duty cycle at 80 amps
- Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Adjustable post flow control up to 50 seconds to improve consumable and torch life
- Front air pressure gauge allows quick verification of air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- IGBT modules improve reliability and performance while reducing overall weight
- CNC socket and CNC torch for plasma table use.
Standard Equipment
- PTM-80 CNC/Machine Torch with 24 ft. cable and Euro quick-connect central connector
- Ground Clamp with 25 Dinse Connector
- Air Pressure Regulator/Water Trap (gauge is not included / separate air dryer is required to reduce consumable wear and prevent torch damage)
- Consumable starter kit: 5x IPT-80 Electrodes and 5x IPT-80 1.2mm Nozzles/Tips
- WEiPU SP21 CNC Connector 12 Pin
Optional Equipment
- Protective Cover
- IPT-80 Hand Held Plasma Torch 14 ft
- IPT-80 Hand Held Plasma Torch 24 ft
- IPT-80 Plasma Consumables Kits
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
Recommended Areas of Use
- Home shop
- Motosports
- Farm/Ranch
- Commercial fabrication
- Factory maintenance
- HVAC
- CNC
Recommended Metals
- Steel
- Stainless
- Aluminum
- Copper
- Titanium
- Nickel/Nickel alloys
- Virtually any metal including cast iron
Specifications
| Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| Output Amp/Volt Range | 20-80A/88V-112V |
| OCV | 240V |
| Max Inrush ( I1MAX ) Amps | @ 240V: 58A |
| Maximum Rated (I1EFF ) Input Amps | @240V: 45.2A |
| Duty Cycle At Rated Amps/Volts | 60% @ 80A/112V 100% @ 63A/105V |
| Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| Torch Type | Italian designed iPT 80 machine torch (Hand torch not included) |
| CNC Interface Port | Yes |
| Adjustable Post Flow Timer | Yes |
| Gouging | Light to Medium |
| Recommended Cutting Air Pressure | 75psi |
| Recommended Compressor Capacity | 7CFM @ 90 psi/60 gallon tank |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| Warranty | 5 year |
| Shipping Weight | 77 lbs |
| Part Number | PP-82I-CNC |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


