Everlast PowerPro 164Si
Everlast PowerPro 164Si
In stock
The PowerPro 164Si is clearly a great choice for the person needing a modestly powered welding package that offers a little bit of everything. It is perfectly suited for the home garage, small fabrication facility or portable repair business. The all new digital IGBT inverter design features 120/240V input for true go anywhere performance. Digital control has improved operation and reliability over the previous PowerPro 164 models while increasing precision of adjustments. If you need true portability for on-the-site welding and cutting or occasional light fabrication chores, the PowerPro 164Si is well equipped to handle your needs, with TIG, Stick and Plasma cutting features. The TIG mode also features full adjustability of the AC output with AC frequency and AC balance controls to offer the maximum quality weld. When you add the simple 2 speed TIG pulse feature, this unit gives you plenty of capability. At the power level this unit puts out, it's able to weld up to 3/16" aluminum and 1/4" steel in a single pass in TIG mode, and handle many common 1/8" stick electrodes. The stick feature offers stick welding power up to 130 amps, enough power for general duty welding up to 1/8" electrodes when TIG welding just isn't possible, and where TIG isn't the best solution. The 40 amp plasma is good for regularly cutting metal up to 3/8" thick with severance capability up to 5/8" thick. This unit also features a generous 60% duty cycle in TIG mode at full power, so there's more welding being done than sitting around waiting for the unit to recover.
Features & Benefits
- Dual Voltage design allows the unit to be used where 120V or 240V voltage is present.
- AC and DC output welds any metal, including aluminum and magnesium.
- Simple 2 position pulse allows you to select 1 Hz or 25 Hz for improved weld appearance and arc focus.
- TIG, Stick or Plasma operation combined in one single unit.
- Flip down Visor protects unit's control panel from sparks and dust.
Standard Equipment
- 12ft. 17-Series air cooled Everlast TIG torch with DINSE-style connector
- Stick electrode holder with 10 ft cable and DINSE-style connector
- 12 ft. S-45 Blowback style Plasma Torch with DINSE-style connector
- Work clamp with 10ft cable and DINSE-style connector
- Argon Regulator for TIG
- Air Pressure regulator with water trap
- Consumable starter kit
- Foot Pedal
- (Cooler and Cart NOT included)
Optional Equipment
- NOVA Torch and Pedal Kit for PowerPro 164Si
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-cooled 9/17/26 series TIG torches
- Amp Control TIG torches
- TIG Consumables Kits
- S-45 Plasma Torch, 25 ft
- S-45 Plasma Consumables Kits
Recommended Areas of Use
- Home Shop
- Portable Repair
- Maintenance shop
- Motorsports/Offroad
- Automotive Garages
Recommended Metals
- Steel
- Stainless
- Chrome-Moly
- Aluminum
- Titanium
Specifications
| IGBT Inverter Type | IGBT |
| Voltage/phase | Dual Voltage 120/240 1 Phase |
| TIG output type | AC/DC |
| TIG Start Type | High Frequency Only |
| Pulse | Yes, Fixed 2 position |
| Plasma Cutter Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| AC Frequency | 20-250 Hz |
| AC Balance (cleaning) | 10-90% |
| OCV | 85V TIG/Stick, 290V Plasma |
| Max Inrush ( I1MAX ) Amps | 120V: 28.5A 240V: 24.8A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 23A 240V: 20 A |
| TIG Output Amps/Volts @ Rated Duty Cycle | 120V: 60% @ 100A/15V 100% @ 80A/13.2V 240V: 60% @ 160A/16.4V 100% @ 130A/15.2V |
| Stick Output Amps/Volts @ Rated Duty Cycle | 120V: 60% @ 90A/23.6V 100% @ 75A/23V 240V: 60% @ 130A/25.2V 100% @ 100A/24V |
| Plasma Output Amps/Volts @ Rated Duty Cycle | 120V: 35% @ 25A/90V 60% @ 20A/88V 240V: 35% @ 40A/ 96V 60% @ 30A/92V 100% @ 20A/ 88V |
| TIG AC Amp/Volt Range | 120V: 20 A-100A; 10.8V-14.0V 240V: 20 A -160A; 10.8V-16.4V |
| TIG DC Amp/Volt Range | 120V: 5A-100A; 10.2V-14V 240V: 5A-160A; 10.2V-16.4V |
| Stick Amp/Volt Range | 120V: 20A-90A; 20.2V-23.6V 250V: 20A-130A; 20.2V-25.2V |
| Plasma Amp/Volt Range | 120V: 20A-25A; 88V-90V 240V: 20A-40A; 88V-96V |
| Start Amps | Fixed, Minimum |
| End Amps | Fixed, Minimum |
| Down Slope Time | 0-10 Seconds |
| Up Slope Time | Fixed, Minimum |
| Preflow time | Fixed, .5 Seconds |
| Post Flow Time | 0-10 Seconds |
| OverCurrent Protection | Yes |
| Duty Cycle Protection | Yes |
| Air Pressure OK Safety Indicator | Yes |
| TIG Pulse Frequency | 1Hz or 25 Hz (Fixed 2 speed) |
| TIG Pulse Time On | Fixed, 50% |
| TIG Pulse Amp Range | Fixed, 50% |
| Stick Arc Force Control | Auto |
| Torch Type | S-45 |
| Recommended Cutting Air Pressure | 75 PSI |
| Recommended Compressor Capacity | 4 CFM or greater, 20 gallon |
| Product Notes | This unit is designed for portable repair and light fabrication chores and is not intended for industrial or production welding. If this unit is to be used with a generator, the generator must be rated by its manufacturer as producing "clean power" which is less than or equal to 5% THD. Minimum generator size should be 7000 surge watts (240V) and 3500 surge watts (120V). |
| Warranty | 5 year |
| Shipping Weight | 92 lbs |
| Part Number | PP-164SI |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


