Everlast PowerPro 205Si
Everlast PowerPro 205Si
In stock
Looking for a good all around welder with some extra features? The PowerPRO 205Si from Everlast is designed to be just that unit. With 200 amp TIG, 160 amp Stick and 50 amp Plasma cutter capabilities, the digitally controlled IGBT Inverter welder/cutter is an all-in-one solution that is useful in many situations where space and portability are key concerns. The flexibility and versatility that the multi-process PowerPro 205S offers is hard to beat. Stable arc performance helps both hobbyists and professionals to make quality repairs in the field or in the fab shop. The TIG pulse capability further extends the unit's capabilites, as well as the fully adjustable AC Frequency and AC balance which improves aluminum welding capabilities. The PowerPRO 205Si multi-unit is definitely the utility player in Everlast's lineup and is ready to go to work anywhere it is needed.
Features & Benefits
- All-in-one portability
- Compact IGBT Inverter design and low power consumption is ideal for portable use
- Compact, yet powerful TIG welding/Plasma cutting features
- Easy to use controls with simple selector switch for process changeover
- Quick change out of torches for easy change from TIG to plasma back to TIG
- Good duty cycle ratings for TIG, Stick, and Plasma
- Duty Cycle indicator warns when thermal threshold has been exceeded and interrupts welding/cutting output until condition is resolved
- Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting output until condition is resolved
- OK to cut indicator lights up when air pressure meets minimum required operating pressure and interrupts cutting output when air pressure is too low
- Low dross cuts on steel up to 5/8" with up to 3/4" maximum capacity (under ideal conditions)
- Exceptional arc stability for TIG/Stick functions
Standard Equipment
- 15ft. Everlast 26-Series air-cooled TIG torch with DINSE-style 35 series connector
- Stick electrode holder with 10 ft cable and DINSE-style 35 series connector
- 14ft. Everlast PT-60 Plasma torch with DINSE-style 35 series connector
- Work clamp with 10 ft. cable and DINSE-style 35 series connector
- Foot pedal
- Argon regulator for TIG
- Air Pressure regulator with water trap/filter (Note: This is not an air dryer. A separate, inline air dryer, supplied by the customer should be installed)
- Consumable starter kit for TIG and Plasma (Does not include TIG tungsten)
- (Cooler and Cart NOT included)
Optional Equipment
- NOVA Torch and Pedal Kit for PowerPro 205Si
- Power Cool 375 Water Cooler (Integrated with the welder)
- Power Cool 300 Water Cooler (Non Integrated, but Compatible with the welder)
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-cooled 9/17/26 series TIG torches
- Water-cooled 18/20 series TIG torches
- Amp Control TIG torches
- TIG Consumables Kits
- iPT-60 Plasma Torch, 25 ft
- iPT-60 Plasma Consumables Kits
Recommended Areas of Use
- Farm/Ranch where portable repairs are needed and carrying multiple units is not an option
- Motorsports/At the track/Offroad where quick repairs are often needed
- For businesses that often need spot repairs and one-off projects completed
Recommended Metals
- Steel
- Stainless
- Aluminum
- Titanium
- Virtually any weldable metal
Specifications
| IGBT Inverter Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| TIG output type | AC/DC |
| TIG Start Type | High Frequency Only |
| Pulse | Yes, Adjustable |
| Plasma Cutter Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| AC Frequency | 20-250Hz |
| AC Balance (cleaning) | 10-90% |
| OCV | 85V TIG/Stick, 250V Plasma |
| Max Inrush ( I1MAX ) Amps | 30A |
| Maximum Rated (I1EFF ) Input Amps | 24A |
| TIG Output Amps/Volts @ Rated Duty Cycle | 200A/18V @ 60% Duty Cycle 160A/16.4V @ 100% Duty Cycle |
| Stick Output Amps/Volts @ Rated Duty Cycle | 160A/26.4V @ 35% Duty Cycle 130A/25.2V @ 60% Duty Cycle 100A/ 24V @ 100% Duty Cycle |
| Plasma Output Amps/Volts @ Rated Duty Cycle | 50A/100V @ 35% Duty Cycle 40A/96V @ 60% Duty Cycle 30A/92V @ 100% Duty Cycle |
| TIG AC Amp/Volt Range | 20A-200A; 10.8V-18V |
| TIG DC Amp/Volt Range | 5A-200A; 10.2V-18V |
| Stick Amp/Volt Range | 5A-160A; 20.2V-26.4V |
| Plasma Amp/Volt Range | 20A-50A; 88V-100V |
| Start Amps | DC: 5A-200A AC: 20A-200A |
| End Amps | DC: 5A-200A AC: 20-200A |
| Down Slope Time | 0-25 Seconds |
| Up Slope Time | 0-10 Seconds |
| Preflow time | 0-10 Seconds |
| Post Flow Time | 0-25 Seconds |
| OverCurrent Protection | Yes |
| Duty Cycle Protection | Yes |
| Air Pressure OK Safety Indicator | Yes |
| TIG Pulse Frequency | .5-250 Hz |
| TIG Pulse Time On | 10-90% |
| TIG Pulse Amp Range | 5-95% |
| Stick Arc Force Control | Yes, 10-100% |
| Torch Type | PT/iPT 60 |
| Recommended Cutting Air Pressure | 75 PSI |
| Recommended Compressor Capacity | 5.0 CFH @ 90 PSI/ 25 Gallon |
| Product Notes | This unit is not designed or intended for Industrial fabrication or production welding. It is not designed for CNC use or for production plasma cutting. If used with a generator, the generator must be rated by its manufacturer as "clean power" which is 5% or less THD. Use with generators that are rated for 9000 watts or greater for best operation. |
| Warranty | 5 year |
| Shipping Weight | 87 lbs |
| Part Number | PP-205SI |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

