Everlast PowerPro 256Si
Everlast PowerPro 256Si
In stock
The Everlast PowerPro 256Si brings maximum power and performance to the table with its newly redesigned IGBT inverter design by featuring digital control. This increases reliability and accuracy. It's ideally suited for repairs and maintenance chores when space and portability on the job site or repair truck are real concerns. The welder features up to 250 amps of AC/DC TIG welding power, and a full 200 amps of stick welding power to handle almost any welding project or task. The plasma cutter also supplies up to 60 amps of power to cut or trim up any metal to complete the task and features the longer life PT/iPT 60 torch. The PowerPro series of welders from Everlast are designed for utility use and offer a good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.
Features & Benefits
- All-in-one portability
- Compact, yet powerful TIG welding/Plasma cutting features
- Digitally controlled IGBT inverter improves performance, reliability and accuracy
- Easy to use controls with touch pad control for process and feature selection
- Quick change out of torches for easy change from TIG to plasma and back to TIG
- Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting
- OK-to-cut indicator lights up when minimum air pressure is present
- Make regular, low dross plasma cuts on steel up to 5/8" thick with a maximum clean cut ability of 3/4"
- Renown arc stability for TIG/Stick functions
Standard Equipment
- 12 ft. Everlast Series-18 water-cooled TIG torch with DINSE 35 style connectors
- Stick electrode holder with 10 ft cable and DINSE 35 style connectors
- 15 ft. iPT 60 Plasma torch with DINSE 35 style connectors
- Work clamp with 10 ft. cables and DINSE 35 style connectors
- Argon Regulator for TIG
- Air pressure regulator for plasma with built in water trap (An extra inline air dryer supplied by the customer is recommended to prevent rapid consumable wear and torch damage)
- Everlast Foot pedal
- Consumable starter kits for TIG and plasma. (Tungsten not included for TIG)
- (Cooler and Cart NOT included)
Optional Equipment
- NOVA Torch and Pedal Kit for PowerPro 256Si
- Power Cool 375 Water Cooler (Integrated with the welder)
- Power Cool 300 Water Cooler (Non Integrated, but Compatible with the welder)
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-cooled 9/17/26 series TIG torches
- Water-cooled 18/20 series TIG torches
- Amp Control TIG torches
- TIG Consumables Kits
- iPT-60 Plasma Torch, 25 ft
- iPT-60 Plasma Consumables Kits
Recommended Areas of Use
- Farm/Ranch portable repair
- Motorsports/ At the track/off road repair and light fab projects
- HVAC
- Factory maintenance and shutdowns
- Custom prototyping/ welding
Recommended Metals
- Steel
- Stainless
- Chrome-Moly
- Aluminum
- Titanium
- Virtually any weldable metal
Specifications
| IGBT Inverter Type | IGBT |
| Voltage/phase | 220/240 V 1 Phase |
| TIG output type | AC/DC |
| TIG Start Type | High Frequency Only |
| Pulse | Yes, Adjustable |
| Plasma Cutter Arc Start Type | Blow Back (Piston type) |
| PilotArc | Yes |
| OK-to-Cut Indicator/Low Air pressure safety | Yes |
| AC Frequency | 20-250 Hz |
| AC Balance (cleaning) | 10-90% |
| OCV | 85V |
| Max Inrush ( I1MAX ) Amps | 40A |
| Maximum Rated (I1EFF ) Input Amps | 32A |
| TIG Output Amps/Volts @ Rated Duty Cycle | 250A/20V @ 60% Duty Cycle 200A/18V @ 100% Duty Cycle |
| Stick Output Amps/Volts @ Rated Duty Cycle | 200A/28V @ 35% Duty Cycle 160A/26.4V @ 60% Duty Cycle 130A/25.2V @ 100% Duty Cycle |
| Plasma Output Amps/Volts @ Rated Duty Cycle | 60A/104V @ 35% Duty Cycle 50A/100V @ 60% Duty Cycle 40A/96V @ 100% Duty Cycle |
| TIG AC Amp/Volt Range | 20A-250A; 10.8V-20V |
| TIG DC Amp/Volt Range | 5A-250A; 10.2V-20V |
| Stick Amp/Volt Range | 5A-200A; 20.2V-28V |
| Plasma Amp/Volt Range | 20A-60A; 88V-104V |
| Start Amps | DC: 5-250A AC: 20-250A |
| End Amps | DC: 5-250A AC: 20-250A |
| Down Slope Time | 0-25 Seconds |
| Up Slope Time | 0-10 Seconds |
| Preflow time | 0-10 Seconds |
| Post Flow Time | 0-25 Seconds |
| OverCurrent Protection | Yes |
| Duty Cycle Protection | Yes |
| Air Pressure OK Safety Indicator | Yes |
| TIG Pulse Frequency | .5-250Hz |
| TIG Pulse Time On | 10-90% |
| TIG Pulse Amp Range | 5-95% |
| Stick Arc Force Control | Yes, 10-100% |
| Torch Type | PT/iPT 60 |
| Recommended Cutting Air Pressure | 75 PSI |
| Recommended Compressor Capacity | 6 CFM @ 90 PSI, 20 Gallon |
| Product Notes | This unit is not designed or intended for Industrial manufacturing or production welding. If using on a generator, the generator must be rated by the generator manufacturer as producing "clean power", which is considered to be <5% THD. The generator should be rated for at least 11,500 watts for best operation. |
| Warranty | 5 year |
| Shipping Weight | 103 lbs |
| Part Number | PP-256SI |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


