Everlast PowerTIG 185DV
Everlast PowerTIG 185DV
In stock
For the extra go anywhere capability, the Everlast PowerTIG185 DV delivers dual voltage capability that will enable you to operate virtually anywhere a power outlet is present. The digitally controlled IGBT inverter of PowerTIG 185DV delivers a smooth, steady arc, as good as any unit in it's class. The PowerTIG 185DV features both AC/DC TIG pulse welding capability along with a stick welding function. The TIG Pulse function is simple to control and use with 2 pre-programmed settings that offer the choice of operating at 1 pulse per second, or at 50 pulses per second. It's designed to be another "tool" in your tool kit when welding metal. When the welder is compared to similar products from Miller or Lincoln, the PowerTIG 185DV offers the widest range of adjustment, and the best duty cycle. The digitally controlled inverter retains the analog style input, making it a favorite for those users that like to "see" all their settings at a glance. This welder is perfect for pet projects around the shop, or a go anywhere portable unit you throw in the truck, when you don't know quite what to expect when you get to the jobsite.
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
- Now with Fan On Arc. This means the fans only run while welding or if an overheat condition occurs.
Features & Benefits
- Compact digitally controlled IGBT inverter
- Smooth, stable arc in AC and DC modes
- Simplified pre-set pulse mode with 1 or 50 Hz selection
- 5 Amp DC/20 Amp AC start
- Automatic Pre-flow
- Adjustable Down-slope control
- Adjustable Post flow time control
- Advanced Square wave output
- 2T/4T operation for torch switch control
- HV or Lift TIG start
- 150 Amp Stick function
- Adjustable AC frequency 20-250Hz
- Adjustable AC balance conttrol 10-90%, same as 250EX
- NOVA SuperFlex torch and NOVA pedal INCLUDED
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
Standard Equipment
- NOVA 17 series Rigid Neck Air-Cooled TIG Torch with 12.5 ft. ultra-flexible cables and 35 DINSE connector
- Torch Switch with 12.5 ft. cable and 7 Pin female style plug for 2T/4T operation
- Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- RH-191 Argon Regulator with Hose
- 6 ft. Input Power Cable with NEMA 6-50 plug
- 240/120V Pigtail Adapter
- Starter Consumable Kit (tungsten not included)
- NOVA Pedal TIG 7 Pin
Optional Equipment
- Protective Cover
- NOVA Amp Control Slider
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Stick Electrode Holder
- Air-Cooled 9/17/26 series TIG Torches
- Amp Control TIG Torches
- TIG Consumables Kits
Recommended Areas of Use
- Portable Repair
- Light Production/Fabrication
- Gun Smith
- Farm/Ranch
- Hobby/ DIY
- Motorsports/Offroad
Recommended Metals
Steel
Stainless
Aluminum
Titanium
Nickel
Virtually all metals.
Specifications
| IGBT Type | Individual IGBT |
| Inverter Type | Digital/Micro-controlled |
| Output Type | AC/DC TIG, DC Stick |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated TIG Amps | 120V: 125A 240V: 185A |
| Max Rated Stick Amps | 120V: 100A 240V: 150A |
| TIG Amps @ Rated Duty Cycle | 120V: 125A/15V @ 35% Duty Cycle/ 40º C 100A/14V @ 60% Duty Cycle/ 40º C 80A/13.2V @ 100% Duty Cycle/ 40º C 240V: 185A/17.4V @ 35% Duty Cycle/ 40º C 145A/15.8V @ 60% Duty Cycle/ 40º C 110A/14.4V @ 100% Duty Cycle/ 40º C |
| Stick Amps @ Rated Duty Cycle | 120V: 100A/24V @ 35% Duty Cycle/ 40º C 80A/23.2V @ 60% Duty Cycle/ 40º C 60A/22.4V @ 100% Duty Cycle/ 40º C 240V: 150A/26V @ 35% Duty Cycle/ 40º C 120A/24.8V @ 60% Duty Cycle/ 40º C 90A/23.6V @ 100% Duty Cycle/ 40º C |
| Max Inrush ( I1MAX ) Amps | 120V: 34A 240V: 29A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 21A 240V: 17A |
| OCV | TIG: 74V Stick: 74V |
| TIG Output Range DC | 120V: 5A-125A 10.2V-15V 240V: 5A-185A/ 10.2V-17.4V |
| TIG Output Range AC | 120V: 20-125A/10.8-15V 240V: 20-185A/10.8-17.4V |
| Stick Ouput Range DC | DC: 120V: 5A-100A/ 20.2V-24V 240V: 5A-150A/20.2V-26V AC: 120V: 20A-100A/20.8V-24V 240V: 20A-150A/20.8V-26V |
| Stick Hot Start Amps | Auto regulated |
| Stick Function | Auto Adaptive Arc Force Control |
| Stick Hot Start Type | Auto Adaptive Hot Start |
| 6010/Cellulose Capable | Limited to 6011 |
| Minimum Amp DC TIG Start | 5A |
| Minimum Amp AC TIG Start | 20A |
| TIG Start Type | Solid State HF and Lift Start |
| HF and Lift | HV (Solid State HF Type) Lift Start with Remote |
| Memory | No |
| Start Amp Range | Fixed, Minimum |
| End Amp Range | Fixed/minimum |
| Upslope Time | Fixed, Minimum |
| Down Slope Time | 0-10 Seconds |
| Preflow time | Preset/Auto .3 Seconds |
| Post Flow Time | 0-25 seconds |
| TIG Pulse | Yes |
| Standard DC Pulse Frequency | 1 or 50 Hz |
| Standard AC Pulse Frequency | 1 or 50 Hz |
| Pulse Time On (Duty Cycle) | Fixed/Preset |
| Pulse Amp Range | Fixed/Preset |
| AC Frequency (Hz) | 20-250Hz |
| AC Balance Range | 10-90% of Positive |
| AC Wave Forms | Advanced Square Wave |
| Remote Control | 2T/4T |
| Foot Pedal | Optional |
| Warranty | 5 year |
| Shipping Weight | 91 lbs |
| Part Number | PT-185DV |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

