Everlast PowerTIG 200DV
Everlast PowerTIG 200DV
In stock
A long time standard in the Everlast lineup, the PowerTIG 200 models have been placed in all sorts of demanding conditions since 2009. It's a favorite among light and medium fabricators who want a simple interface, but still want to have upscale features. Undoubtedly, the newest version of the PowerTIG 200DV is the best yet. It is more efficient and power "sipping" than ever. It also has been fine tuned is more robust than ever. The new stackable PowerCool 375 cooler matches perfectly to the PowerTIG 200DV and adds to the appeal of the unit. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go-anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for 8500W (240V) surge watts and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
- Now with Fan On Arc. The fans only run while welding or if an overheat condition has ocurred.
- Now with Cooler Control Technology.
Features & Benefits
- Reliable IGBTs for stable inverter performance
- 120V/240V Dual Voltage input
- Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
- Pre flow and Post flow control for maximum shielding gas protection before and after
- Color coded controls are easy to identify and understand
- Lift start function for use when HF is not desireable
- AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
- 240V Outlet in rear for optional WC 300 water cooler
- Pre flow and Post flow control for gas
- Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
- Pulse frequency ranges from .5-150 Hz in AC and DC mode
- HV Start.
- Fan on Arc (As demanded). Fan only comes on while welding, and stays on briefly after welding before shutting off. It also comes on when the unit over heats and reaches it's duty cycle limits.
- Cooler control starts cooler when arc is struck. Cooler shuts down after arc is terminated.
Standard Equipment
- 26 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 DINSE connector
- Torch Switch TIG with 12.5 ft. cable and 7 Pin male plug for 2T/4T operation
- Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- Power Pedal TIG Deluxe 22K
- RH-191 Argon Regulator with Hose
- 240/120V Pigtail Adapter
- 6 ft. Input Power Cable with NEMA 6-50 plug
- Starter Consumable Kit (tungsten not included)
- (Cooler and Cart NOT included)
Optional Equipment
- NOVA Torch and Pedal Kit for Power TIG 200DV
- PowerCool W375 Water Cooler (Integrated with the welder)
- PowerCool W300 Water Cooler (Non-Integrated, but compatible with the welder)
- Foot Pedal
- Amp Control Slider
- Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-cooled 9/17/26 series TIG torches
- Water-cooled 18/20 series TIG torches
- Amp Control TIG torches
- TIG Consumables Kits
- PowerCart 375LF
Recommended Areas of Use
- Hobby/ DIY
- Gunsmith
- Motorsports/Offroad
- Farm/Ranch
- Production welding/ Fabrication
- Shipyards
- Piplelines
- Industrial maintenance/HVAC
- Portable Repair
Recommended Metals
- Steel
- Stainless Steel
- Chrome Moly
- Aluminum
- Titanium
- Copper
- Virtually any metal
Specifications
| IGBT Type | Individual IGBT |
| Inverter Type | Digital/Micro-controlled |
| Output Type | AC/DC TIG, DC Stick |
| Voltage/phase | DUAL VOLTAGE 120/240 1 PHASE |
| Max Rated TIG Amps | 120V: 125 Amps 240V: 200 Amps |
| Max Rated Stick Amps | 120V: 100A 240V: 160A |
| TIG Amps @ Rated Duty Cycle | 120V: 125A/15V @ 60% Duty Cycle/ 40º C 100A/14V @ 100% Duty Cycle/ 40º C 240V: 200A/18V @ 60% Duty Cycle/ 40º C 160A/16.4V @ 100% Duty Cycle/ 40º C |
| Stick Amps @ Rated Duty Cycle | 120V: 100A/24V @ 35% Duty Cycle/ 40º C 80A/23.2V @ 60% Duty Cycle/ 40º C 60A/ 22.4V @ 100% Duty Cycle/ 40º C 240V: 160A/26.4V @ 35% Duty Cycle/ 40º C 130A/25.2V @ 60% Duty Cycle/ 40º C 100A/24V @ 100% Duty Cycle/ 40º C |
| Max Inrush ( I1MAX ) Amps | 120V: 35A 240V: 31A |
| Maximum Rated (I1EFF ) Input Amps | 120V: 24A 240V: 23A |
| OCV | TIG: 75V Stick: 75V |
| TIG Output Range DC | 120V: 5A-125A/10.2V-15V 240V: 5A-200A/10.2V-18V |
| TIG Output Range AC | 120V: 20A-125A/ 10.8V-15V 240V: 20A-200A/10.8V-18V |
| Stick Ouput Range DC | 120V: 5A-100A/ 20.2V-24V 240V: 5A-160A/20.2V-26.4V |
| Stick Function | Adjustable Arc Force Control |
| Stick Hot Start Type | Auto Adaptive Hot Start |
| 6010/Cellulose Capable | Limited to 6011 |
| Minimum Amp DC TIG Start | 5A |
| Minimum Amp AC TIG Start | 20A |
| TIG Start Type | HF Lift TIG |
| TIG Start Type | Solid State HF and Lift Start |
| HF and Lift | HV Start (Solid State HF Type) Lift Start with Remote |
| Memory | No |
| End Amp Range | Fixed Minimum |
| Upslope Time | Fixed, Minimum |
| Down Slope Time | 0-25 Seconds |
| Preflow time | 0-10 Seconds |
| Post Flow Time | 0-25 Seconds |
| TIG Pulse | Yes |
| Standard DC Pulse Frequency | .5-150Hz |
| Standard AC Pulse Frequency | .5-150Hz |
| Pulse Time On (Duty Cycle) | 10-90% |
| Pulse Amp Range | 5-95% of welding amps |
| AC Frequency (Hz) | 20-250Hz |
| AC Balance Range | 20-80% of Electrode Positive |
| AC Wave Forms | Advanced Square Wave |
| Remote Control | 2T/4T |
| Foot Pedal | Standard |
| Warranty | 5 year |
| Shipping Weight | 91 lbs |
| Part Number | PT-200DV |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

