Everlast PowerTIG 325EXT (1/3 Phase 240V)
Everlast PowerTIG 325EXT (1/3 Phase 240V)
In stock
The PowerTIG 325EXT is built for superior industrial performance. With Digital microprocessor control over the IGBT inverter, and up to 325 amps of TIG welding Power, the PowerTIG 325EXT packs considerable punch. The IGBT module inverter design creates a reliable and serviceable platform designed for years of service. The unit is equipped with many features that improve its value in the shop. One of the features that is highly useful is the Advanced Pulse in AC which can greatly increase penetration while welding aluminum, and make it seem like you are welding with a lot larger machine than you are. Wave form control, AC frequency and AC balance control combine to round out the welder into a very capable Aluminum welder. However, the DC capabilities should not be overlooked either with plenty of features which includes a standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions. The standard PowerTIG 325EXT listed here is 240V 1 or 3 phase operation.
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
- Now with Fan-On-Demand. The fan now runs when it is needed, starting on arc start and terminating as the welder cools down enough after the arc stops.
NOTE: This unit is for operation with 220/240V 1 or 3 phase operation. For 480V 3 phase operation, please see this separate model listing: PowerTIG 325EXT (~3 Phase 480V).
Features & Benefits
- Digital microprocessor control
- IGBT Power Modules increase reliability and performance
- Operation down to 5 Amps DC and 10 amps AC
- 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
- Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
- Heavy-Duty High Frequency design reduces maintenance issues and improves start reliability
- No hidden menus to access or complicated set up routines
- Simplified menu design allows settings to be quickly selected and adjusted
- Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
- Pulse up to 500Hz in DC, 250 Hz AC
- 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
- Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance
- VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding
- 240 1 phase
- Electronic HV Start replaces older HF point gap starting
- Fan runs on demand when arc starts and terminates automatically after arc stops.
Standard Equipment
- 9 series Air-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- 20 series Water-Cooled TIG Torch with 12.5 ft. cables and 35 Dinse connector
- 2x Torch Switch TIG with 12.5 ft. cable and 7 Pin female plug for 2T/4T operation
- Stick Electrode Holder with 10 ft. cable and 35 Dinse connector
- Ground Clamp with 10 ft. cable and 35 Dinse connector
- Power Pedal TIG Deluxe 22K
- RH-191 Argon Regulator with Hose
- 6 ft. Input Power Cable (plug not included)
- Starter TIG Consumable Kit (tungsten not included)
- (Cooler and Cart NOT included)
Optional Equipment
- NOVA Torch and Pedal Kit for PowerTIG 325EXT
- PowerCool W375 Water Cooler (Integrated with the welder)
- PowerCool W300 Water Cooler (Non-integrated, but compatible with the welder)
- PowerCart 375LF
- Foot Pedal
- NOVA Slider AMP Control
- Welder Protective Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-Cooled 9/17/26 series TIG Torches
- Water-Cooled 18/20 series TIG Torches
- Amp Control TIG Torches
- TIG Consumables Kits
Recommended Areas of Use
- Fabrication/Production welding
- Motorsports/Offroad
- General automotive use
- Prototyping
- Shipyards
- Pipelines
- Farm/Ranch
- Industrial maintenance
- Air Craft
- Gun Smithing
- Hobby/DIY
Recommended Metals
- Steel
- Stainless Steel
- Chrome Moly
- Aluminum
- Titanium
- Copper
- Virtually any weldable metal
Specifications
| IGBT Type | Module IGBT |
| Inverter Type | Digital/Micro-controlled |
| Output Type | AC/DC TIG, DC Stick |
| Voltage/phase | 220/240 V 1/3 PHASE |
| Max Rated TIG Amps | 325A |
| Max Rated Stick Amps | 250A |
| TIG Amps @ Rated Duty Cycle | 325A/22.9V @ 35% Duty Cycle/ 40º C 245A/19.8V @ 60% Duty Cycle/ 40º C 190A/17.6V @ 100% Duty Cycle/ 40º C |
| Stick Amps @ Rated Duty Cycle | 250A/30V @ 35% Duty Cycle/ 40º C 200A/28V @ 60% Duty Cycle/ 40 º C 160A/ 26.4V @ 100% Duty Cycle/ 40 º C |
| Max Inrush ( I1MAX ) Amps | 60A @ 240V 1ph 30A @ 240V 3ph |
| Maximum Rated (I1EFF ) Input Amps | 36A @ 240V 1ph 18A @ 240V 3ph |
| OCV | 88V (<24V with VRD) |
| TIG Output Range DC | 5A-325A/10.2-22.9V |
| TIG Output Range AC | 10A-325A/10.4-22.9V |
| Stick Ouput Range DC | 20A-250A/20.8-30V |
| Stick Hot Start Amps | 0-100% |
| Stick Function | Adjustable Arc Force Control |
| Stick Hot Start Type | Adjustable Hot Start |
| Stick Hot Start Time | 0-2 Seconds |
| 6010/Cellulose Capable | Yes |
| Minimum Amp DC TIG Start | 5A |
| Minimum Amp AC TIG Start | 10A |
| TIG Start Type | HV Start (Electronic controlled form of the older HF type start, which eliminates the point gap design) Lift Start |
| TIG Start Type | Solid State HF and Lift Start |
| Memory | Yes |
| Start Amp Range | DC: 5A-325A AC: 10A-325A |
| End Amp Range | DC: 5A-325A AC: 10A-325A |
| Upslope Time | 0-25 Seconds |
| Down Slope Time | 0-25 Seconds |
| Preflow time | 0-25 Seconds |
| Post Flow Time | 0-25 Seconds |
| TIG Pulse | Yes |
| Standard DC Pulse Frequency | .1-500Hz |
| Standard AC Pulse Frequency | .1-250Hz |
| AC Advanced Pulse Frequency | .1-10Hz |
| Pulse Time On (Duty Cycle) | 5-95% |
| Pulse Amp Range | 5-100% |
| AC Frequency (Hz) | 20-250Hz |
| AC Balance Range | 5-90% |
| AC Wave Forms | Advanced Square Soft Square Triangular Sine |
| Remote Control | 2T/4T with Torch Amptrol settings |
| Foot Pedal | Standard |
| Warranty | 5 year |
| Shipping Weight | 105 lbs |
| Part Number | PT-325EXT-240 |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


