Everlast Tempest 401i
Everlast Tempest 401i
In stock
The all new Tempest 401i MIG package is a true industrial power source type of unit. The welder's design features tough IP23 ingress protection standards, potted boards and internally durable construction make this a true jobsite machine, whether in the shipyard or out in the field. The welder can weld MIG, DC scratch start TIG, Stick and also features an air carbon arc gouge function for heavy duty gouging. The size of the power source means that it can be carried anywhere or be used in "Power Racks" on skids if needed. The wire feeder is a heavy 500A wire feeder with the capacity to feed wire over 850 IPM (22m/min). With the optional longer umbilical, the wire feeder can be used up to 75 feet away from the main power source. For Air Carbon Arc Cutting/Gouging, just connect your favorite gouging torch and select the setting and you are ready to go. The unit does come with an accessory package for MIG, TIG and Stick welding.
Features & Benefits
- Heavy Duty CC/CV Inverter Power Source reduces the amount of units needed out in the field and on the job site for heavy marine and structural use.
- Ideal for Dual Shielded types of Flux-Core wires
- 5 individual settings for Mig, Flux Core, DC Tig, Stick and Carbon Arc Gouging
- Everlast's most durable Power Source type industrial welder to date, part of the new Heavy Industrial lineup, performs well against competitor's product such as the Miller XMT® and Lincoln Invertec® CC/CV
- Boards and sensitive electronics are either coated or potted to resist moisture, dirt and shock
- High Duty cycle performance at maximum amps improves production.
- Adjustable MIG arc force/inductance control precisely manages the arc characteristics to produce the best possible weld
- 2T/4T torch trigger/latch function offers stepped control welding with MIG with crater fill amps and volts to finish off a perfect weld
- The Tempest 401 is capable of powering the wire feeder (included) up to 75 feet away so only the wire feeder needs to be carried into position.
- The wire feeder adjusts both volts and wire feed speed directly on the feeder without having to return to the power source to change settings
- The wire feeder includes an inching button and a heavy duty gear driven wire feed mechanism with 4 drive rolls to power feed large diameter wire
- AutoHot Start and Adjustable arc force control makes burning pipeline rods such as 6010 5P easy.
- Scratch Start DC TIG offers the same precise, smooth arc of other Everlast inverter welders
- A special optimized setting makes Carbon Arc gouging easy
- Crater fill Volts and Amps for MIG yield high quality MIG results to prevent end weld cracking
Standard Equipment
- N24 MIG Gun with 10 ft. cable and Euro style Quick Connector
- Stick Electrode Holder with 10 ft. cable and 35 DINSE Connector
- Ground Clamp with 10ft. cable and 35 DINSE Connector
- Rolling Cart that integrates both wire feeder and power source with room for a gas cylinder
- WF-500M-GA Wire Feeder with set of .045"-.062" (1.2mm-1.6mm) V Groove (Hard wire) Drive Rolls
- Additional set of .030"-.040" (0.8mm-1.0mm) V Groove (Hard wire) Drive Rolls included
- Wire Feeder connection cables up to 15 ft.
- Spare HD M6 Contact MIG Tips .030" (2) and .040" (2)
- Spare 24 series 12.5x63.5mm Nozzle
Optional Equipment
- 24 series MIG Consumables
- HD M6 Contact MIG Tips
- LARGE Drive Rolls for Wire Feeder
- Different MIG Guns
Recommended Areas of Use
- Portable Repair On Road or Off Road
- Construction sites
- Heavy Equipment
- Factory Maintenance
- Industrial Fabrication/Production
- Pipe Line
- Marine
- Farm and Ranch
Recommended Metals
- Steel
- Stainless
- Chrome Moly
- Aluminum (with optional liner for MIG gun)
Specifications
| Type | Analog IGBT Inverter |
| Output /Process Type | MIG, DC TIG, DC Stick |
| Voltage/phase | 480 V 3 PHASE |
| Max Rated MIG Amps | 400A |
| Max Rated TIG Amps | 400A |
| Max Rated Stick Amps | 400A |
| MIG Amps/Volts @ Rated Duty Cycle | 400A/34V @ 60% @ 104 F° (40°C) |
| TIG Output Amps/Volts @ Rated Duty Cycle | 400A/36V @ 60% @ 104 F° (40°C) |
| Stick Amps/Volts @ Rated Duty Cycle | 400A/36V @ 60% @ 104 F° (40°C) |
| Max Inrush ( I1MAX ) Amps | 480V: 16A |
| Maximum Rated (I1EFF ) Input Amps | 480V: 12A |
| OCV | 72V |
| MIG Output Range | 60-400A/17-34V |
| TIG Output Range | 30-400A/21.2-36V |
| Stick Output Range | 30-400A/21.2-36V |
| Variable MIG Inductance/Stick Arc Force Control | Yes |
| Spool Gun Capable | No |
| Pulse | No |
| Standard Drive Roll wire size | .040” and greater |
| Separate wire feeder | Yes |
| Number of Drive rollers | 4 |
| Max Wire Feed Speed | 850 IPM/22m/min |
| Max Wire Roll Diameter | 12” (full size up to 44lb) |
| Memory | No |
| Upslope Time | No |
| Down Slope Time | No |
| Preflow time | Auto |
| Post Flow Time | Auto |
| Flux Core | Yes, Optional |
| Air Carbon Arc | Yes |
| 2T/4T /Torch latch/Trigger | Yes |
| Other Features | Wire Jog Gas Purge |
| Warranty | 5 year |
| Shipping Weight | 318 lbs |
| Part Number | EV-TMP-401-480V |
Ships direct from the manufacturer. Lead times Vary.
Couldn't load pickup availability
Shipping & Return
Shipping & Return
Once we receive your return, we’ll process your refund within 5-7 business days. Refunds will be credited back to your original payment method. For more details on how to start a return, visit our Returns page or contact our support team—we’re here to help! Shop confidently knowing we’ve got you covered.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


